TRIBOS-M HJND 50 Ø3x38
다각형 툴홀더
ID 1355376
본 상품은 단종되었으며, 한정된 기간 동안만 판매됩니다.
문의하기
이 제품은 온라인에서만 요청할 수 있습니다.
TRIBOS-M HJND 50 Ø3x38, 툴홀더
- 다각형 툴홀더
- 시리즈: TRIBOS-Mini
- 툴홀더 인터페이스: HJND 50
- 클램핑 지름: 3 mm
- 투영 길이: 38 mm
- 흔들림 정확도: 4 x D의 0.01mm 이하
- 밸런싱 등급: 잔류 밸런스 불량 2gmm/kg
- 최소 토크: 1.5 Nm
기술 세부 정보
| Technology | Polygonal toolholders |
|---|---|
| Series | TRIBOS-Mini |
| Toolholder interface | HJND 50 |
| Clamping diameter D1 | 3 mm |
| D2 [mm] | 9.0 |
| D3 [mm] | 14.5 |
| D4 [mm] | 18.0 |
| D5 [mm] | 23.0 |
| L [mm] | 57.5 |
| Projecting length L1 [mm]/[inch] | 38 mm / 1.5" |
| L4 [mm] | 22.5 |
| L5 [mm] | 27.5 |
| L6 [mm] | 30.0 |
| G | M8 |
| Min. torque [Nm] | 1.5 |
| Wrench size A/F | 13.0 |
| Max. tightening torque [Nm] | 8.0 |
Version
The following reduction insert is a suitable alternative for lateral joining: TRIBOS-S SRE SO 9 (0206080)
Run-out accuracy
≤ 0.01 mm of 4 x D
Balancing grade
Residual imbalance 2 gmm/kg
Tool shank quality
h6
Length-setting screw
Without adjustment screw for axial length adjustment
The minimum clamping depth is 17.5 mm
The maximum clamping depth is 35 mm
Individual
Additional sizes and customized designs are available upon request