AOV-10-6-V
Ponceuse excentrique
ID 1435148
Renseignez-vous dès maintenant
Ce produit ne peut pas être commandé en ligne
Ponceuse excentrique AOV, Taille: 10, pneumatique, avec raccordement facultatif pour l'aspiration
- Compliance en Z: 12.7 mm
- Force Fz max.: 66.7 N
Détails techniques
| maximum air consumption [l/s] | 9.5 |
|---|---|
| Noise emission [dB(A)] | < 85 |
| Force Fz max. [N] | 66.7 |
| Compensation air connection | 4 mm |
| Recommended compensation path [mm] | ± 5 |
| Weight [kg] | 2.68 |
| Grinding stroke [mm] | 5.0 |
| Grinding disk size | 150 mm (6'') |
| Compensation Z [mm] | 12.7 |
| Max. retraction compensation force [N] | 33.3 |
| Max. extension compensation force [N] | 66.7 |
| Min. extension compensation force [N] | 13.3 |
| Max. ambient temperature [°C] | 35.0 |
| Air connection motor | 10 mm |
| Diameter D [mm] | 150.0 |
| Height Z [mm] | 148.0 |
| Min. compensating pressure [bar] | 1.0 |
| Idle speed [1/min] | 10000.0 |
| Max. compensation pressure [bar] | 4.1 |
| Min. retraction compensation force [N] | 6.7 |
| Min. ambient temperature [°C] | 5.0 |
| Operating pressure [bar] | 6.2 |
| with optional connection for suction | yes |
Dimensions and maximum loads
Dimensions and maximum loads
The indicated forces show the maximum payload.
General notes about the series
Ambient conditions
Please note that the unit is notsuitable for use in an area where coolants or cutting fluids are present.
Mounting
on the robot arm or as a stationary unit
Actuation
pneumatic, via filtered (<5 µm, dry) and oiled compressed air (2-3 drops per hour)
Warranty
24 months