MTTA HSK-A 63 MK3x140
Morse taper mountings with tangs
ID 23000520
MTTA HSK-A 63 MK3x140, Toolholders
- Morse taper mountings with tangs
- Series: Morse taper mountings with tangs
- Toolholder interface: HSK-A 63
- Morse taper: MK 3
- Projecting length: 140 mm
- Run-out accuracy: ≤ 0.008 mm measured from taper to internal taper
- Balancing grade: G6.3 at 8,000 RPM or Umax < 1 gmm
Technical details
| Technologie | Alojamientos de cono Morse con espigas |
|---|---|
| Baureihe | Alojamientos de cono Morse con espigas |
| Werkzeughalterschnittstelle | HSK-A 63 |
| Werkzeughalternorm | DIN ISO 12164-1 |
| MK-Größe | MK 3 |
| D2 [mm] | 40.0 |
| Auskraglänge L1 [mm] / [inch] | 140 mm / 5.5" |
| L4 [mm] | 114.0 |
| Gewicht [kg] | 1.48 |
| Kühlmitteldicht | sí |
| Standardlänge | sí |
Versione
Per il montaggio di codoli cono morse, conformemente alla norma ISO 228B.
Concentricità
≤ 0,008 mm misurato dal cono al cono interno
Grado di bilanciatura
G6,3 a 8.000 giri/min o Umax < 1 gmm
Sedi chip
Fori sede chip conformi alla norma ISO 69873
Cambio del portautensile
Per il cambio automatico del portautensile
Ogni esigenza
Ulteriori misure e versioni personalizzate disponibili su richiesta