AGE-XY-080
ID 324480
- Kompenzace XY: ± 4 mm
- Hmotnost obrobku: 15 kg
- Vychýlení rotační: ± 16 °
- Max. síla Fz : 750 N
- Max. síla Fd: 3200 N
Technické údaje
| Kompenzace XY [mm] | ± 4 |
|---|---|
| Vychýlení rotační [°] | ± 16 |
| Doporučená manipulační hmotnost, svisle [kg] | 15.0 |
| Doporučená manipulační hmotnost, vodorovně [kg] | 10.0 |
| Uzamykací síla [N] | 580.0 |
| Max. síla zatížení uzamčena [N] | 310.0 |
| Síla posunutí v max. vzdálenosti Z [mm] | 200.0 |
| Min. provozní tlak [bar] | 2.5 |
| Max. provozní tlak [bar] | 8.0 |
| Jmenovitý provozní tlak [bar] | 6.0 |
| Opakovatelná přesnost [mm] | 0.1 |
| Montáž na straně robotu | ISO 9409-1-80-6-M8 |
| Vlastní hmotnost [kg] | 1.49 |
| Min. okolní teplota [°C] | 5.0 |
| Max. okolní teplota [°C] | 60.0 |
| Průměr D [mm] | 100.0 |
| Výška Z [mm] | 62.0 |
| Max. moment Mx [Nm] | 30.0 |
| Max. moment My [Nm] | 30.0 |
| Max. moment Mz [Nm] | 9.0 |
| Max. síla Fz [N] | 750.0 |
| Max. síla Fd [N] | 3200.0 |
Rozměry a maximální zatížení
Funkční schéma
Tabulka zatížení
Rozměry a maximální zatížení
Toto je max. součet všech momentů a zatížení (akcelerační síly a momenty, procesní síly atd.), které mohou působit na kompenzační jednotku tak, aby byla zajištěna její bezchybná funkce.
Funkční schéma
Tabulka zatížení
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Guidance system
Robust sliding guide
Monitoring
by magnetic switch
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Housing
hard anodized aluminum alloy, functional parts made of hardened steel
Scope of delivery
Compensation unit in the ordered variant, elements for mechanical connection and safety information. Product-specific instructions can be downloaded at schunk.com/downloads-manuals.
Warranty
24 months