KLM 100-H200
ID 314030
- Max. Hub: 200 mm
Technické údaje
| Corsa [mm] | 200.0 |
|---|---|
| Forza di estrazione [N] | 294.0 |
| Forza di rientro [N] | 226.0 |
| Precisione di ripetibilità [mm] | 0.03 |
| Diametro del pistone [mm] | 25.0 |
| Diametro della barra [mm] | 12.0 |
| Pressione d'esercizio min. [bar] | 3.0 |
| Pressione di esercizio max. [bar] | 8.0 |
| Pressione d'esercizio nominale [bar] | 6.0 |
| Volume del cilindro/10 mm per corsa doppia [cm³] | 4.9 |
| Lunghezza complessiva [mm] | 570.0 |
| Classe di protezione IP | 40 |
| Temperatura ambiente min. [°C] | 5.0 |
| Temperatura ambiente max. [°C] | 60.0 |
| Classe di camera bianca ISO 14644-1 | 6 |
| Classe camera bianca ISO 14644-1 | 1999 |
| Peso [kg] | 5.1 |
| Sistema di azionamento | Cilindro con stelo |
| Lunghezza X [mm] | 570.0 |
| Larghezza Y [mm] | 80.0 |
| Altezza Z [mm] | 60.0 |
| Coppia Mx max [Nm] | 5.0 |
| Coppia My max. [Nm] | 44.5 |
| Coppia Mz max [Nm] | 44.5 |
| Distanza N (per carico di coppia) [mm] | 44.0 |
| Forza assiale max. Fz max. [N] | 194.0 |
寸法と最大荷重
寸法と最大荷重
ここに示す荷重と負荷トルクは、単一の負荷の最大値です。複数の荷重、または負荷トルクが同時に発生した場合、アプリケーションの事例は TOOLBOX で計算できます。荷重 Fy は TOOLBOX でのみ計算できます。
General notes about the series
Repeat accuracy
is defined as a distribution of the end positions for 100 consecutive cycles.
Travel times
are pure movement times of the slide or the base body. Valve switching times, hose filling times, or PLC reaction times are not a part of this and are to be considered when cycle times are calculated.
Stroke
is the maximum nominal stroke of the unit. It can be shortened on both sides by the shock absorbers.
Layout or control calculation
For configuration or control calculation of the units, we recommend to use our Toolbox software, which is available online. Verifying the sizing of the selected unit is absolutely necessary, as otherwise overloading may occur.
Ambient conditions
The modules are mainly designed for the use in clean ambient conditions. Please note that the life time of the modules can shorten if they are used in harsh ambient conditions, and that SCHUNK cannot assume liability in such cases. Please contact us for assistance.
Housing material
Aluminum alloy, anodized
Guidance
Ball bushing guide
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Scope of delivery
Shock absorber and driver for proximity switch
Warranty
24 months
Service life characteristics
on request