WEL S HSK-A 63 Ø10x100
Držáky koncové frézky WELDON
ID 23000635
WEL S HSK-A 63 Ø10x100, Upínače nástrojů
- Držáky koncové frézky WELDON
- Řada: WELDON Slim
- Rozhraní upínače nástrojů: HSK-A 63
- Uchopovací průměr: 10 mm
- Projekční délka: 100 mm
- Obvodová házivost: ≤ 0,003 mm měřeno od kuželu k D1
- Stupeň vyvážení: G6.3 při 8.000 ot/min nebo Umax < 1 gmm
Technické údaje
| Technology | WELDON end mill holders |
|---|---|
| Series | WELDON Slim |
| Toolholder interface | HSK-A 63 |
| Toolholder standard | DIN ISO 12164-1 |
| Clamping diameter D1 | 10 mm |
| D2 [mm] | 28.0 |
| D6 [mm] | 23.0 |
| Projecting length L1 [mm]/[inch] | 100 mm / 3.9" |
| L2 [mm] | 40.5 |
| L4 [mm] | 74.0 |
| G | M8x1 |
| G1 | M6 |
| Weight [kg] | 0.965 |
| Coolant-proof | yes |
Version
For clamping tools with cylindrical shanks as per DIN 1835B/6359HB and DIN 1835E/6359HE
Run-out accuracy
≤ 0.003 mm measured from taper to D1
Balancing grade
G6.3 at 8,000 RPM or Umax < 1 gmm
Thread G1
G1 = thread for clamping screw
Data carriers
Bore holes for data carriers according to DIN 69873
Toolholder changes
For automatic toolholder changes
Scope of delivery
Including WELDON clamping screw
Individual
Additional sizes and customized designs are available upon request