RST-D 134-4
ID 315520
Ring indexing table RST-D, Size: 134, pneumatic, without feed-through, Pitch: 4, Angle of rotation: 90 °, Direction of rotation: on both sides, End position damping: hydr. damper
- Torque: 29.3 Nm
Technical details
| Angle of rotation [°] | 90.0 |
|---|---|
| Pitch | 4.0 |
| Direction of rotation | on both sides |
| Torque [Nm] | 29.3 |
| Weight [kg] | 8.3 |
| IP protection class | 50 |
| Locking time [s] | 0.1 |
| Unlocking time [s] | 0.1 |
| Min. ambient temperature [°C] | 5.0 |
| Max. ambient temperature [°C] | 60.0 |
| Min. operating pressure [bar] | 4.0 |
| Max. operating pressure [bar] | 8.0 |
| Nominal operating pressure [bar] | 6.0 |
| Cylinder volume per double stroke [cm³] | 198.0 |
| Repeat accuracy [°] | 0.04 |
| Run-out cycle ring [mm] | 0.02 |
| Axial run-out cycle ring [mm] | 0.02 |
| Parallelism cycle ring [mm] | 0.03 |
| Number of hydraulic shock absorber | 2.0 |
| Length X [mm] | 204.0 |
| Width Y [mm] | 150.0 |
| Height Z [mm] | 100.0 |
| Moment My max. [Nm] | 525.0 |
| Moment Mz max. [Nm] | 100.0 |
| Max. axial force Fz max. [N] | 9550.0 |
| Max. radial force Fr max. [N] | 8250.0 |
Dimensions and maximum loads
Swiveling time
Dimensions and maximum loads
The indicated moments and forces are statical values and may appear simultaneously. Throttling has to be done for ensuring that the rotary movement takes place without impact or bouncing. Otherwise the service life reduces.
Swiveling time
- X-axis:
- Swiveling time
- Y-axis:
- Mass moment of inertia
- X-axis top:
- Cycles per hour
The diagrams are valid for applications with vertical rotary axis or for absolutely centric loads with horizontal rotary axis and with a pneumatic working pressure of 6 bars. The swiveling times per throttling have to be observed, otherwise the life time may reduce. Operation with a horizontal swivel axis is only permitted with a centric load. We will be happy to help you designing other applications.
产品系列的常规说明
重复精度
定义为 100 个连续行程后极限位置分布。
传动环
传动环的位置始终位于基本位置。环从此位置顺时针或逆时针转动。
回转时间
小齿轮/法兰围绕标称旋转角旋转的时间。不包括阀门开关时间、软管注入时间或 PLC 反应时间，但是计算周期时必须考虑这些时间。
参考传感器
为监控基本位置，可连接电感式传感器，每 360°启动。可用于参考运行或检查控制装置是否正确计数。
回转时间取决于有效荷载
所示图适用于标称旋转角度，与垂直回转轴配合使用；或者水平回转轴的中心有效荷载，且工作压力为 6 bar。 该图说明预期的回转时间，每小时的旋转周期取决于转动惯量。 需要使用节流阀调整回转时间，否则的话，将缩短适用寿命。我们很乐意帮您设计其他应用。
循环总时间
循环总时间包含了每次循环的旋转时间以及所需的其它时间间隔。请见操作手册中有关循环总时间精确计算方面的信息。
外壳材料
铝合金，阳极氧化
启动
气动，带符合 ISO 8573-1:2010 [7:4:4] 的过滤压缩空气。
工作原理
减少侧隙的传动用齿条和小齿轮原理
标配范围
定心元件、安全信息（具体的产品说明可线上获取）
保修期
24 个月
使用寿命特性
根据要求