arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitter userwarning wechat xing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
ROTA TB2 570-230 Z415-SV90°

ROTA TB2 570-230 Z415-SV90°

Pneumatic 3-jaw power chuck

ID 818312

Ready for shipment from 11 working days
Standard pneumatic power lathe chucks

Product features:
  • 3-jaw wedge-hook chuck
  • Through-hole: 230 mm
  • Spindle holder: Z415
  • Chuck side: 230 mm (9.06")
  • Machine side: 230 mm (9.06")
  • Jaw interface: 3/32" x 90° Nut 25,5H7
Technical data:
  • Stroke per jaw: 11.7 mm
  • Max. clamping force at 6 bar: 220 kN
  • Max. actuating pressure: 3 - 8 bar
  • Max. RPM: 1300 1/min
  • Weight: 345 kg
Spindle size Z415
Serration 3/32" x 90°
Max. RPM [1/min] 1300
Max. clamping force (at 6 bar) [kN] 220
Min. operating pressure [bar] 3
Max. operating pressure [bar] 8
Stroke/jaw [mm] 11.7
Air consumption/jaw stroke at 6 bar [l] 39.9
Moment of inertia [kgm²] 17
Weight [kg] 345

General notes about the series

Definition clamping force
The clamping force is the arithmetic sum of the individual forces occuring at the chuck jaws, distance “H“ at maximum pressure and maximum torque. The specifications exclusively refer to the grease used by SCHUNK.

Scope of delivery
Chuck, T-nuts with screws, chuck mounting bolts, 2 elbow-unions G 3/8“ on the distributor ring, set-screw to position the distributor ring, couplings for connection to the electric compressed air control unit, eye bolt, operating manual; without distributor ring mounting bracket