WEL HSK-A100 Ø6x160
Držáky koncové frézky WELDON
ID 23000202
WEL HSK-A100 Ø6x160, Upínače nástrojů
- Držáky koncové frézky WELDON
- Řada: WELDON
- Rozhraní upínače nástrojů: HSK-A 100
- Uchopovací průměr: 6 mm
- Projekční délka: 160 mm
- Obvodová házivost: ≤ 0,003 mm měřeno od kuželu k D1
- Stupeň vyvážení: G2,5 při 25.000 ot/min nebo Umax < 1 gmm
Technical details
| Series | WELDON |
|---|---|
| D2 [mm] | 25.0 |
| D6 [mm] | 14.5 |
| G1 | M6 |
| Technology | WELDON end mill holders |
| Toolholder interface | HSK-A 100 |
| Toolholder standard | DIN ISO 12164-1 |
| Clamping diameter D1 | 6 mm |
| Weight [kg] | 2.67 |
| L4 [mm] | 131.0 |
| L2 [mm] | 35.0 |
| Projecting length L1 [mm]/[inch] | 160 mm / 6.3" |
Version
For clamping tools with cylindrical shanks in accordance with DIN 1835B/6359HB
Run-out accuracy
≤ 0.003 mm measured from taper to D1
Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm
Thread G1
G1 = thread for clamping screw
Data carriers
Bore holes for data carriers according to DIN 69873
Toolholder changes
For automatic toolholder changes
Scope of delivery
Including WELDON clamping screw
Individual
Additional sizes and customized designs are available upon request