arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
GAP 20-030-AS Illustration similar

GAP 20-030-AS

Angular parallel gripper

ID 314603

Angular parallel gripper GAP, Size: 20, pneumatic, with gripping force maintenance: AS (spring-closing)

  • Stroke per jaw: 1 mm
  • Closing force: 150 N
  • Opening angle: 30 °
  • Max. ambient temperature: 60 °C
Stroke per jaw [mm] 1.0
Closing force [N] 150.0
Closing force (with finger lengths of 0 mm) [N] 170.0
Min. spring force [N] 58.0
Opening angle per jaw [°] 30.0
Weight [kg] 0.39
Recommended workpiece weight [kg] 0.46
Cylinder volume per double stroke [cm³] 4.0
Min. operating pressure [bar] 4.5
Max. operating pressure [bar] 6.5
Nominal operating pressure [bar] 6.0
Closing time [s] 0.12
Opening time [s] 0.08
Max. permissible finger length [mm] 40.0
Max. permissible weight per finger [kg] 0.1
Max. permissible inertia per chuck jaw [kgcm²] 3.12
IP protection class 40
Min. ambient temperature [°C] 5.0
Max. ambient temperature [°C] 60.0
Repeat accuracy [mm] 0.05
Moment Mx max. [Nm] 4.9
Moment My max. [Nm] 4.7
Moment Mz max. [Nm] 1.2
Max. axial force Fz max. [N] 240.0
Gripping force maintenance version yes

General notes about the series

Closing moment
is the arithmetic sum of the individual moment applied to each jaw.

Finger length
is measured from the reference surface as the distance P in direction to the main axis.

Repeat accuracy
is defined as a distribution of the end Position for 100 consecutive strokes.

Workpiece weight
is calculated for force-fit gripping with a coefficient of static friction of 0.1 and a safety factor of 2 against workpiece slippage at acceleration due to gravity g. For form-fit or capture gripping, there are significantly higher permissible workpiece weights.

Closing and opening times
are movement times of the base jaws only, without application-specific gripper fingers. Valve switching times, hose fill times, or PLC reaction times are not included, and are to be considered when cycle times are calculated.

作動方式
確実に駆動されるトグルジョイント運動機構

ハウジングの材質
特殊ハードコート処理されたアルミ合金

ベースジョーの材質
鋼鉄

作動
空圧式、フィルターを通した圧縮空気、ISO 8573-1:2010 [7:4:4] に準拠。

保証
24 カ月

寿命特性
ご要望によって

納品内容
注文仕様のグリッパー、アクセサリーキット(芯出しスリーブ、直接接続用Oリング/詳細内容は取扱説明書を参照)、安全に関する情報。製品固有の説明書は、schunk.com/downloads-manualsからダウンロードいただけます。

把持力の維持
把持力の機械式保持バージョンまたは圧力保持バルブ SDV-P 付きのバージョンを使用することで可能です。