AGM-Z 160
Compensation unit
ID 1575992
Compensation unit AGM-Z, Size: 160, with locking
- Compensation direction: Z
- Compensation Z: 15 mm
Technical details
| Compensation Z [mm] | 15.0 |
|---|---|
| Locking force retracted [N] | 4500.0 |
| Locking force extended [N] | 7000.0 |
| Min. spring force [N] | 900.0 |
| Max. spring force [N] | 1350.0 |
| Min. operating pressure [bar] | 2.5 |
| Max. operating pressure [bar] | 6.5 |
| Nominal operating pressure [bar] | 6.0 |
| Repeat accuracy [mm] | 0.02 |
| Robot-side connection | ISO 9409-1-160-6-M10 |
| Tool-side connection | ISO 9409-1-160-6-M10 |
| Weight [kg] | 17.7 |
| Min. ambient temperature [°C] | 5.0 |
| Max. ambient temperature [°C] | 60.0 |
| Fluid consumption [cm³] | 370.0 |
| Extension time [s] | 0.4 |
| Retraction time [s] | 0.8 |
| Air connections locked and unlocked | G1/8" |
| Max. eccentric load [mm] | 800.0 |
| IP protection class | 50 |
| Max. static moment Mx/My [Nm] | 550.0 |
| Max. static moment Mz [Nm] | 750.0 |
| Max. static force Fx/Fy [N] | 4000.0 |
| Max. static force Fz [N] | 4500.0 |
| Max. dynamic moment Mx/My [Nm] | 275.0 |
| Max. dynamic moment Mz [Nm] | 380.0 |
| Force Fx max. dynamic [N] | 1800.0 |
| Force Fy max. dynamic [N] | 1800.0 |
| Force Fz max. dynamic [N] | 2600.0 |
| Max. force Fd [N] | 9000.0 |
Further technical data can be found at schunk.com.
Max. loads
AGM-Z load diagram – vertical structure
AGM-Z load diagram – horizontal structure
Deflection
AGM-Z deflection diagram – horizontal structure
Max. loads
This is the sum of all static loads that are permitted to act on the compensation unit.
AGM-Z load diagram – vertical structure
- X-axis:
- Distance of the center of gravity
- Y-axis:
- Load capacity
AGM-Z load diagram – horizontal structure
- X-axis:
- Distance of the center of gravity
- Y-axis:
- Load capacity
Deflection
Illustration applies to AGM-Z and AGM-XYZ
AGM-Z deflection diagram – horizontal structure
- X-axis:
- Distance of the center of gravity
- Y-axis:
- Deflection
The diagram shows the change in the maximum deflection (fa) as a function of the lever arm (L) in the depressurized status and the moments (Mx,y) acting on the additionally attached mass. The diagram does not replace the technical design.
モデルシリーズに関する一般注意事項
厳しい環境条件
厳しい環境条件 (クーラント関連、鋳造屑および研削屑など) 下で使用すると、ユニットの製品寿命が大幅に短くなる可能性があり、この場合は保証の対象外となることにご注意ください。しかしながら、多くの場合シュンクがソリューションを見つけることも可能です。サポートについてはお気軽にお問い合わせください。
流体消費
伸縮1サイクルあたりのエア消費量を示します
ガイドシステム
ボールガイド
モニター
磁気スイッチまたは誘導型近接センサー経由
作動
空圧式、フィルターを通した圧縮空気、ISO 8573-1:2010 [7:4:4] に準拠。
ハウジング
硬質アルマイト処理アルミニウム合金、焼き入れ鋼製の機能部品
納品内容
注文品仕様の、補正ユニット、機械的接続のためのエレメント、安全に関する情報。製品固有の説明書は、schunk.com/downloads-manualsからダウンロードいただけます。
保証
24 カ月