GFS 40-90°-L
ID 355528
- Krútiaci moment: 10 Nm
Technical details
| Uhol rotácie [°] | 90 |
|---|---|
| Smer otáčania | Vľavo |
| Nastavenie koncovej polohy [°] | 3 |
| Tlmenie koncovej polohy | Hydr. tlmič |
| Krútiaci moment [Nm] | 10.0 |
| Trieda ochrany IP | 54 |
| Hmotnosť [kg] | 5.0 |
| Doba otáčania (1x menovitý uhol otáčania) bez upevneného zaťaženia [s] | 0.4 |
| Spotreba vzduchu (2x menovitý uhol) [cm³] | 32.0 |
| Nominálny prevádzkový tlak [bar] | 6.0 |
| Min. prevádzkový tlak [bar] | 3.0 |
| Max. prevádzkový tlak [bar] | 8.0 |
| Priemer pripájacej hadice | 6 x 3.9 x 1.05 |
| Min. teplota okolia [°C] | 5.0 |
| Max. teplota okolia [°C] | 60.0 |
| Presnosť opakovania [°] | 0.07 |
| Dĺžka X [mm] | 292.0 |
| Šírka Y [mm] | 69.0 |
| Výška Z [mm] | 249.0 |
| Moment Mz max. [Nm] | 240.0 |
| Sila Fy max. [N] | 3300.0 |
Rozmery a max. zaťaženia
Rozmery a max. zaťaženia
Moment a sila môžu na pastorok pôsobiť súčasne.
General notes about the series
Counter-bearings
Counter-bearings have no drive and no damping
Repeat accuracy
is defined as a distribution of the end position for 100 consecutive cycles.
Customized angle of rotation
More swivel angles are available on request.
Swiveling time
is the rotation time of pinion/flange around the nominal rotation angle. Valve switching times, hose filling times, or PLC reaction times are not included and are to be considered when cycle times are calculated.
Layout or control calculation
Verifying the sizing of the selected unit is necessary, since otherwise overloading can result. Please contact us for assistance.
Housing material
hard-anodized, high strength aluminum
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Operating principle
double acting piston with geared transmission
Scope of delivery
Centering sleeves, O-rings for direct connection, assembly and operating manual with manufacturer’s declaration
Warranty
24 months
Service life characteristics
on request