arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Wijzig het land om informatie te zien over de producten, diensten en contactpersonen die relevant zijn voor uw locatie.
MMSK 22-PI2-S-NPN-SA Vergelijkbare illustratie

MMSK 22-PI2-S-NPN-SA

Programmeerbare magneetschakelaars

IDnr. 301189

Programmeerbare magneetschakelaar MMS 22-PI2, Variant met laterale kabeluitgang, Inleerfunctie, C-groef

  • Aantal schakelpunten: 2
  • Type schakeling: NPN
  • Sluiter
  • Kabellengte: 200 cm
  • Elektrische aansluiting: Open kabeldraden
  • Nominale spanning: 24 V
Measuring principle magnetisch
Switching function Sluiter
Type of switching NPN
Number of switching points 2
Teach function ja
typical switching time [s] 0.001
Max. switching frequency [Hz] 1000.0
Min. ambient temperature [°C] -20.0
Max. ambient temperature [°C] 80.0
LED display in sensor ja
Type of voltage DC
Nominal voltage 24.0
Min. operating voltage 10.0
Max. operating voltage 30.0
Voltage drop [V] 2.0
Max. switching current 25.0
Short circuit protection ja
Protected against polarity reversal ja
Housing material PA
Cable connector/cable end Open kabeldraden
Cable length L [cm] 200.0
Cable diameter D [mm] 2.55
Cable design (wire cross section/number of wires) 4x 0,05mm2
Cable sheath material PUR
Min. bending radius (dynamic) [mm] 25.5
Min. bending radius (static) [mm] 12.75
Weight [kg] 0.04
Protection class IP (sensor, plugged) 67
Protection class III
Version with lateral cable outlet ja
*Tested cutting emulsions: r.rhenus TU 43P, Motorex Swisscool Magnum UX 550 and Oemeta 760 (1008339).

General notes about the series

SCHUNK gripping and rotary modules as well as linear axes and robot accessory components must always be monitored with the suitable sensors from SCHUNK, since these components are adapted to one another as effectively as possible.

Adjustment of sensor and product is characterized by the interplay of the parameter type and strength of the magnet, clearance, wall thickness, and wall material between magnet and sensor, and by alignment, and sensitivity of the sensor.

Sensors of other manufacturers which are integrated into SCHUNK products, seldom provide excellent switching results. Moreover, we cannot ensure proper function or functional safety of them.

Due to the comparatively high accuracy of the sensor, the difference between teaching temperature and work temperature may not exceed 30 K.

Housing material
PA

Material of the cable coating
PUR

Mounting
clamped in the sensor groove, fixed with a socket head screw

Warranty
24 months