arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
WELDON

WELDON

WELDON End Mill Holders
WELDON end mill holders can be used to reliably clamp tools with a lateral clamping face on the cylindrical shank. Due to the clamping screw of the mounting, the tool cannot twist or pull out. The mounting is suitable for clamping tools with cylindrical shanks in accordance with DIN 1835B and DIN 6535HB. The clamping screw is included in the scope of delivery.
The WELDON Cool Flow enables peripheral cooling by means of cooling channels in the wall, which can be optionally closed with two M3 screws. The coolant is fed directly to the cutting edge of the tool. The WELDON Dual Contact variant with simultaneous taper and flat work surface closes the interface-related gap between tool flange and the front of the machine spindle with the interface of the flat work surface.
263533
HSK-A 63 
16 mm 
80.0 mm
23002953
HSK-A 63 
16 mm 
120.0 mm
263535
HSK-A 63 
18 mm 
80.0 mm
23002888
HSK-A 63 
18 mm 
120.0 mm
263536
HSK-A 63 
18 mm 
160.0 mm
263537
HSK-A 63 
20 mm 
80.0 mm
23000202
HSK-A 100 
6 mm 
160.0 mm
23000194
HSK-A 100 
8 mm 
80.0 mm
23000203
HSK-A 100 
8 mm 
160.0 mm
23000195
HSK-A 100 
10 mm 
80.0 mm