CWA-125-P
ID 305826
- Anzahl Fluiddurchführungen: 4
- Kraft Fz max.: 1200 N
- Max. Gesamtzuladung: 28 kg
Technical details
| Doporučená manipulační hmotnost [kg] | 28.0 |
|---|---|
| Opakovatelná přesnost [mm] | 0.01 |
| Vlastní hmotnost [kg] | 0.125 |
| Počet pneumatických průchodů | 4.0 |
| Min. okolní teplota [°C] | 5.0 |
| Max. okolní teplota [°C] | 60.0 |
| Přímá připojení na* | PGN-plus 125 |
| Délka X [mm] | 100.0 |
| Šířka Y [mm] | 60.0 |
| Výška Z [mm] | 10.0 |
| Max. moment Mx [Nm] | 110.0 |
| Max. moment My [Nm] | 160.0 |
| Max. moment Mz [Nm] | 200.0 |
| Max. síla Fz [N] | 1200.0 |
* Vezměte na vědomí, že výšky výměnné hlavy (ZK) a výměnného adaptéru (ZA) se liší. Součet představuje celkovou výšku propojeného výměnného systému.
Rozměry a maximální zatížení
Rozměry a maximální zatížení
Toto je max. součet všech sil a momentů, které mohou působit na výměnný systém, aby bylo zajištěno správné fungování.
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Actuation
manually via Allen key, provided by the customer
Operating principle
by turning the threaded spindle, the clamping jaws are clamped or unclamped
Media transmission
Integrated pneumatic feed-through
Housing
The housing consists of high-strength, hard-coated aluminum alloy. The functional components are made of hardened steel.
Scope of delivery
Centering sleeves for mounting and direct connection
Warranty
24 months