arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
CELSIO CF JIS-BT 40 Ø8x130 類似のイラスト

CELSIO CF JIS-BT 40 Ø8x130

焼きバメタイプ

ID 1474403

納期はお問い合わせください
CELSIO CF JIS-BT 40 Ø8x130, ツールホルダー
  • 焼きバメタイプ
  • シリーズ: CELSIO
  • Cool Flow モデル
  • ツールバーインターフェース: JIS-BT 40
  • クランプ径: 8 mm
  • 突出長さ: 130 mm
  • 振れ精度: ≤ 0.003  mm、クランピングボアで測定 (DIN 69882-8に準拠)
  • バランスグレード: 25,000 RPM または Umax < 1 gmm 時に G2.5
  • 最小トルク: 50 Nm
Technology Heat shrinking toolholder
Series CELSIO
Toolholder interface JIS-BT 40
Toolholder standard DIN ISO 7388-2 JD/JF
Clamping diameter D1 8 mm
D2 [mm] 27.0
D6 [mm] 21.0
Projecting length L1 [mm]/[inch] 130 mm / 5.1"
L2 [mm] 37.0
L3 [mm] 10.0
L4 [mm] 103.0
G M6
Min. torque [Nm] 50.0
Weight [kg] 1.36
Cool Flow variant yes

Run-out accuracy
≤ 0.003 mm measured in the clamping bore (according to DIN 69882-8)

Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm

Tool shank quality
h6

Data carriers
Bore for data carrier as an option

Toolholder changes
For automatic toolholder changes

Coolant supply
Cool Flow version
Coolant is fed via two coolant bore holes directly to the cutting edge of the tool
Coolant supply according to ISO 7388 JD/JF
Bores for form JF are sealed for transport

Length-setting screw
With adjustment screw for axial length adjustment

Balancing screw
With thread for balancing screws

Individual
Additional sizes and customized designs are available upon request