KSH3 200-Z-PM
Hydraulické 2čelisťové silové svěráky
ID 1486540
Standardní hydraulické upínací silové bloky
Vlastnosti produktu:
Vlastnosti produktu:
- 2čelisťový silový svěrák
- Středicí upínání
- Standardní zdvih
- Souřadnicové polohovací otvory
- Pneumatické monitorování koncové polohy
- Pneumatické monitorování kontaktu
- Základní čelisti: Jemné zoubkování a pero s drážkou
- Rozměry: 200 x 200 x 95,2 mm
- Upínací síla při max. provozním tlaku: 60 kN
- Zdvih na čelist: 4 mm
- Max. výška čelisti: 100 mm
- Opakovatelná přesnost: 0.02 mm
- Provozní tlak: 10 - 60 bar
- Spotřeba oleje / dvojitý zdvih: 150 cm³
- Zavírací/otevírací čas: 1.3 s
- Vlastní hmotnost: 24 kg
Technical details
| Stroke per jaw [mm] | 4.0 |
|---|---|
| Clamping force at max. operating pressure [kN] | 60.0 |
| Min. operating pressure [bar] | 10.0 |
| Max. operating pressure [bar] | 60.0 |
| Repeat accuracy of vise [mm] | 0.02 |
| Max. jaw height [mm] | 100.0 |
| Distance H [mm] | 30.0 |
| Oil consumption per double stroke [cm³] | 150.0 |
| Closing/opening time [s] | 1.3 |
| Weight [kg] | 24.0 |
Scope of delivery
Clamping force block, mounting screws for system jaws and clamping force block, cover plugs, fitting screws, clamping sleeves, operating manual
Clamping force
The clamping force is the arithmetic sum of the individual forces occurring at the jaws at distance "H" at maximum pressure.
Height tolerance of the vise
±0.04 mm.
Clamping force blocks with the same height are available on request.
Repeat accuracy
Results from the end position spread after 100 consecutive strokes
Maintenance and repair
For the maintenance of TANDEM vises, our special grease LP 410 should be used (ID 0184213)