KSF3-LH 250
ID 1457396
Propiedades del producto:
- Prensa de sujeción de 2 mordazas
- Sujeción autocentrante
- Carrera larga
- Mordazas base: Dentado fino y chaveta en cruz
- Dimensiones: 250 x 250 x 98,2 mm
- Rango de fuerza de sujeción: 15 - 21 kN
- Rango de fuerza de sujeción con turbo: 40 - 46 kN
- Carrera por mordaza: 15 mm
- Altura máx. de la mordaza: 500 mm
- Precisión de repetición: 0.02 mm
- Presión de apertura: 6 - 9 bar
- Presión del turbo máx.: 6 bar
- Consumo de aire por carrera: 4600 cm³
- Tiempo de cierre/apertura: 1.5 s
- Peso: 40 kg
Technical details
| Stroke per jaw [mm] | 15.0 |
|---|---|
| Min. clamping force [kN] | 15.0 |
| Max. clamping force [kN] | 21.0 |
| Repeat accuracy of vise [mm] | 0.02 |
| Max. jaw height [mm] | 500.0 |
| Distance H [mm] | 40.0 |
| Air consumption per stroke at 6 bar [cm³] | 4600.0 |
| Closing/opening time [s] | 1.5 |
| Weight [kg] | 40.0 |
Scope of delivery
Clamping force block, fastening screws for system jaws and clamping force block, cover plugs, fitting screws, clamping sleeves, operating manual
Clamping force
The clamping force is the arithmetic sum of the individual forces occurring at the jaws at distance "H" at maximum pressure.
Clamping force range
The clamping force depends on the stroke due to the spring tension. Max. clamping force is reached in the "open" condition, min. clamping force in the "closed" condition.
Height tolerance of the vise
±0.04 mm.
Clamping force blocks with the same height are available on request.
Repeat accuracy
Results from the end position spread after 100 consecutive strokes
Maintenance and repair
For the maintenance of TANDEM vises, our special grease LP 410 should be used (ID 0184213)