KSX-E 125-430 IOL
ID 1601446
Caratteristiche del prodotto:
- Senza ganasce base
- Controllo attraverso l'IO-Link
- Forza di serraggio programmabile in modo continuo
- Forze di serraggio programmabili in modo continuo
- Preposizionamento dei morsetti
- Trasferimento pneumatico del fluido nella ganascia base
- Interfaccia IO-Link: Contatti a molla
- Dimensioni: 125 x 492 x 150 mm
- Corsa di serraggio di base: 120 mm
- Forza di serraggio: 6 - 40 kN
- Unità di controllo della tensione d'esercizio: 24 V DC
- Attuatore della tensione d'esercizio: 48 V DC
- Peso: 32 kg
Specifiche tecniche
| Width of the clamping vise [mm] | 125.0 |
|---|---|
| Min. clamping force [kN] | 6.0 |
| Max. clamping force [kN] | 40.0 |
| Operating voltage control unit [V DC] | 24.0 |
| Operating voltage actuator [V DC] | 48.0 |
| Basic clamping stroke [mm] | 120.0 |
| Weight [kg] | 32.0 |
Scope of delivery
Vise, operating manual; without system jaws, without fixed contact for integration into the machine control
Programmable clamping force
The clamping force can be continuously adjusted via the software in a range from 6 kN to 40 kN per chuck jaw.
Jaw pre-positioning and programmable clamping stroke
The jaws can be pre-positioned depending on the workpiece size so that the clamping stroke and clamping time can then be reduced to a minimum during automated loading processes.
Pneumatic media transfer into the system jaw
For workpiece contact control via dynamic pressure or cleaning of the clamping surfaces The system jaws must be prepared accordingly by the customer.
Clamping range
To cover the entire clamping range from 5 to 420 mm, the vise must be extended with the corresponding drawbar extension (see accessories).