Palletizing module NSA3
Palettizing modules
Maintenance-free and completely sealed quick-change pallet module for automated high-end palletizing in the third generation.
Description
Advantages – Your benefits
- Integrated monitoring and lifting function make this development particularly suitable for automated production
Maximum process reliability even with rough machining - All modules can be operated with a system pressure of 6 bar
Additional pressure intensifiers are not required - Positioning via short taper
Very easy joining process at a repeat accuracy of < 0.005 mm - Patented dual stroke system for highest pull-down forces
Therefore extremely rigid clamping without vibrations - Form-fit, self-retained locking
Full pull-down force is maintained even in the event of a pressure drop - The modules are stainless and completely sealed
Long life time and maximum process reliability - Turbo integrated by default
Pull-down force increased by up to 300% for optimum use of the machine´s performance, hence high efficiency - Extremely flat design
For maximum utilization of the machine room - Integrated cleaning function
No chips or coolant on the flat work surface
Options and special information
- Extremely flat automation module for high-end palletizing
SCHUNK has further developed its high-end VERO-S NSA plus palletizing module especially for automated machine tool loading and transferred it to the new NSA3 generation. The clamping module is part of the extensive SCHUNK VERO-S modular system for efficient workpiece clamping. The NSA3 is 100% compatible with the NSA plus, meaning they are 1:1 interchangeable. - Higher rigidity and dimensional stability
The high pull-down force on the NSA3 120 of 3,000 N or 10,000 N when the turbo function is activated, as well as higher dimensional stability of the module body, benefit rigidity. This means that higher tilting moments and lateral forces can be reliably absorbed with the NSA3. Depending on the application, the modules can be combined in any quantity. The repeat accuracy amounts to < 0.005 mm. Due to the conical fitting, the clamping rings can be fitted into the modules either eccentrically or with an angle of inclination, making it particularly easy. - Monitoring integrated by default
By default, all monitoring activities such as "Module opened" or "Module closed" are integrated in the module. The clamping rings rest on four flat surfaces on the outer diameter, which is controlled by a dynamic pressure monitoring. Due to the hermetic sealing as well as the stainless steel design, the module remains maintenance-free over its complete service life.