TCU-P-160-3-MV
ID 324846
- Workpiece weight: 30 kg
- Force Fz max.: 400 N
- Force Fd max.: 4300 N
Technical details
| Locking | with locking |
|---|---|
| Hardness of the elastomer [Shore] | 68.0 |
| Deflection X [°] | ± 1 |
| Deflection Y [°] | ± 2 |
| Deflection Z [°] | ± 1.5 |
| Repeat accuracy [mm] | 0.02 |
| Weight [kg] | 0.7 |
| Min. operating pressure [bar] | 4.0 |
| Max. operating pressure [bar] | 8.0 |
| Min. ambient temperature [°C] | -10.0 |
| Max. ambient temperature [°C] | 90.0 |
| Locking moment Mx [Nm] | 30.0 |
| Locking moment My [Nm] | 18.0 |
| Locking moment Mz [Nm] | 50.0 |
| Locking force Fz [N] | 400.0 |
| Max. force Fd [N] | 4300.0 |
| Direct connection to* | PGN-plus 160 |
| Length X [mm] | 72.0 |
| Width Y [mm] | 125.0 |
| Moment Mx max. [Nm] | 160.0 |
| Moment My max. [Nm] | 70.0 |
| Moment Mz max. [Nm] | 120.0 |
尺寸和最大载荷
挠曲
Load chart
最大偏离
尺寸和最大载荷
解锁时力和扭矩Wie最大值，可同时作用。锁定时，仅允许重量和加速度产生的荷载。
挠曲
取决于至质心长度（L）的挠曲（fa）
Load chart
- X-axis:
- Max. distance
- Y-axis:
- Max. handling weight
最大偏离
取决于至质心长度（L）的挠曲（fa）
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Monitoring
by magnetic switch
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Material
Elastomer material
Housing
Aluminum alloy
Scope of delivery
Robot-side mounting screws
Warranty
24 months