LM 200-H325-ASP
ID 314482
- Max. stroke: 325 mm
Technical details
| Stroke [mm] | 325.0 |
|---|---|
| extend force [N] | 482.0 |
| retracted force [N] | 415.0 |
| Repeat accuracy [mm] | 0.02 |
| Piston diameter [mm] | 32.0 |
| Bar diameter [mm] | 12.0 |
| Min. operating pressure [bar] | 3.0 |
| Max. operating pressure [bar] | 8.0 |
| Nominal operating pressure [bar] | 6.0 |
| Cylinder volume/10 mm per double stroke [cm³] | 8.04 |
| Overall length [mm] | 824.0 |
| IP protection class | 40 |
| Min. ambient temperature [°C] | 5.0 |
| Max. ambient temperature [°C] | 60.0 |
| Cleanroom class ISO 14644-1 | 6 |
| Cleanroom class: ISO 14644-1 | 1999 |
| Weight [kg] | 10.59 |
| Drive concept | Piston rod cylinders |
| Length X [mm] | 824.0 |
| Width Y [mm] | 80.0 |
| Height Z [mm] | 75.0 |
| Moment Mx max. [Nm] | 182.0 |
| Moment My max. [Nm] | 225.0 |
| Moment Mz max. [Nm] | 112.5 |
| Clearance N (for moment load) [mm] | 56.5 |
| Max. axial force Fz max. [N] | 2130.0 |
| Version with holding brake | yes |
Dimensions and maximum loads
Dimensions and maximum loads
The indicated forces and moments are maximum values for single load. If more than one force and/or torque occurs simultaneously, the case of application can be calculated by using the Toolbox. The force Fy can only be calculated by using the Toolbox.
モデルシリーズに関する一般注意事項
繰り返し精度
連続する 100 回の旋回サイクルにおける停止位置のばらつきを示します。
移動時間
スライダーまたはベース本体の純粋な移動時間です。バルブ開閉回数、ホース充填回数または PLC 反応回数はこの部分ではなく、サイクルタイムを計算する時に考慮します。
ストローク
これがユニットの最大呼びストロークです。これは、ショックアブソーバーによって両側で短縮可能です。
レイアウトまたはコントロール計算
ユニットの構成または制御計算については、オンラインで利用可能な Toolbox ソフトウェアの使用を推奨します。 選択したユニットのサイズ確認は必須であり、確認を行わない場合過負荷が発生します。
周囲条件
このモジュールは主に、きれいな周囲条件で使用するために設計されています。厳しい環境下で使用するとモジュールの寿命が短くなることがあります。その場合、SCHUNKは責任を負いかねますのでご注意ください。サポートについてはお気軽にお問い合わせください。
ハウジングの材質
特殊ハードコート処理されたアルミ合金
ガイド
予圧のかかったバックラッシュのないクロスローラーガイド
作動
空圧式、フィルターを通した圧縮空気、ISO 8573-1:2010 [7:4:4] に準拠。
納品内容
近接スイッチ用ダンパーおよびドライバー
保証
24 カ月
寿命特性
ご要望によって