MMS 22-A
Analog position sensor
The analog MMS 22-A magnetic sensor is used for monitoring the status of SCHUNK grippers. It detects the approach of a magnet without contact and returns a continuous output signal.
Beschreibung
Vorteile – Ihr Nutzen
- C-Nuten-Sensor
zum Einschub in den Greifer, dadurch keine Störkontur - Programmieren in Sekundenschnelle
dank des berührungslosen, magnetischen Teachwerkzeugs - Beliebig einstellbarer Wegmessbereich
für eine analoge Positionsabfrage auch bei größeren Hüben - Integrierte Elektronik
trotz platzsparender Außenkontur, ermöglicht eine flexible Kabelkonfektion - Ausführung mit LED-Anzeige
zur Kontrolle des Betriebszustandes direkt am Sensor - Ausführung mit Standard-Steckverbinder
für einfache und schnelle Austauschbarkeit des Verlängerungskabels - Hochflexibles Kabel in PUR-Ausführung
für eine lange Lebensdauer
Options and special information
- 5 or 10 V output voltage
The MMS 22-A is available in versions with 5 or 10 V output voltage. The 5 V sensor is optimized for operation with the SCHUNK FPS system. The 10 V sensor, on the other hand, can be directly connected to an analog input, for example a PLC or a separate input card. - Sources of interference
Sensors can be influenced by other magnetic fields in the immediate vicinity. Disturbing magnetic fields can be generated by motors, electric welders, permanent magnets or magnetized material (so-called soft magnets) such as hexagon socket wrenches, chips, etc. - High protection class
IP67 when plugged in, for use in clean or dusty environments or in case of contact with water. Operability in case of contact with other media (coolant, acids, bases, etc.) is often given, however cannot be guaranteed by SCHUNK. - Shielding of a cable extension
Shielded cables are recommended if the analog signal is routed via cable extensions. The cable must be shielded on one end.