arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
DPZ-plus

DPZ-plus

Sealed universal gripper
Despite the high moment load of the base jaws, this sealed 3-finger centric gripper meets the requirements of IP67 and does not permit the ingress of any substances from the working environment into the interior of the component.

Advantages – Your benefits

  • Robust interior multi-tooth guidance
    for the precise handling of different workpieces
  • Lip seal at the outside round guidance
    for permanent, secure gripper sealing
  • High maximum moments possible
    suitable for using long gripper fingers
  • Sealed 3-finger centric gripper
    complies to IP67 requirements despite a high moment load
  • Fastening at one gripper side in two screw directions
    for universal and flexible gripper assembly
  • Maximum gripping forces at a compact design
    for a wide range of applications
  • Air supply via hose-free direct connection or screw connections
    for flexible pressure supply in all automated systems
  • Compact dimensions
    for minimal interfering contours in handling

Options and special information

  • Gripping force maintenance version AS/IS
    The mechanical gripping force maintenance version ensures minimum gripping force even in the event of a pressure drop. In the AS/S version this acts as a closing force, in the IS version as an opening force.
  • Power booster version KVZ
    if higher gripping forces are required
  • ATEX version EX
    for explosive environments
  • Additional versions
    Various options can be combined with each other. Numerous additional options are also available – just tell us what your task is!
  • Integrated air purge connection
    impedes the ingress of dirt into the inside of the gripper
  • Please note that to achieve an IP 67 protection class, the gripper requires an additional hose for ventilation or a switchable air purge connection. For detailed information, please refer to the assembly and operating manual. Alternatively, a sinter filter (supplied) mounted on the air purge connection can prevent the penetration of dirt particles > 0.12 mm. However, this reduces the protection class to IP 54.