arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.


Sealed universal gripper
Despite the high moment load of the base jaws, this sealed 3-finger centric gripper meets the requirements of IP67 and does not permit the ingress of any substances from the working environment into the interior of the component.

Advantages – Your benefits

  • Robust interior multi-tooth guidance
    for the precise handling of different workpieces
  • Lip seal at the outside round guidance
    for permanent, secure gripper sealing
  • High maximum moments possible
    suitable for using long gripper fingers
  • Sealed 3-finger centric gripper
    complies to IP67 requirements despite a high moment load
  • Fastening at one gripper side in two screw directions
    for universal and flexible gripper assembly
  • Maximum gripping forces at a compact design
    for a wide range of applications
  • Air supply via hose-free direct connection or screw connections
    for flexible pressure supply in all automated systems
  • Compact dimensions
    for minimal interfering contours in handling

Options and special information

  • Gripping force maintenance version AS/IS
    The mechanical gripping force maintenance version ensures minimum gripping force even in the event of a pressure drop. In the AS/S version this acts as a closing force, in the IS version as an opening force.
  • Power booster version KVZ
    if higher gripping forces are required
  • ATEX version EX
    for explosive environments
  • Additional versions
    Various options can be combined with each other. Numerous additional options are also available – just tell us what your task is!
  • Integrated air purge connection
    impedes the ingress of dirt into the inside of the gripper
  • Please note that to achieve an IP 67 protection class, the gripper requires an additional hose for ventilation or a switchable air purge connection. For detailed information, please refer to the assembly and operating manual. Alternatively, a sinter filter (supplied) mounted on the air purge connection can prevent the penetration of dirt particles > 0.12 mm. However, this reduces the protection class to IP 54.