No product detail page could be found for this serial number. If you should have any questions about the product, you can search for the material number in the search field or contact us.
How can we help you?
Your request to SCHUNK
Find field sales representatives
Newsletter registration
Request CAD data
Your quote request
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
The pneumatically actuated modular system WDP-5X enables user-friendly set-up of large components. The modules are clamped via spring force and can be opened simultaneously with compressed air. Depending on customer's request, the pneumatic modules can be replaced by manual modules in order to enable manual actuation. The basic modules serve as a basis for every clamping solution. They establish a rigid connection to all conventional machine tables. Using the stacking modules, the individual clamping heights can then be achieved. The form-fit connection to the workpiece is finally implemented using clamping modules in combination with clamping pins, compensation pins or clamping pin increases.
Our performance promise. Your benefits.
Clamping of freely molded parts
Clamping without interfering contour
Pull-down forces of up to 25 kN
Integrated air feed-through to the clamping module
Clamping modules or compensation modules used as an interface to the workpiece. The clamping modules can be actuated pneumatically or manually. The compensation modules serve to compensate for fine height differences.
