ROTA-S plus 630-252 D15-SFG
Manual lathe chuck with quick jaw change
ID 814264
Standard manual lathe chucks
Product features:
Product features:
- 3-jaw wedge-bar chuck
- Jaw quick-change system
- Through-hole: 252 mm
- Spindle holder: ISO 702-2 Nr. 15
- Jaw interface: Angled serration
- Stroke per jaw: 15 mm
- Tooth pitch: 8.5 mm
- Max. clamping force: 270 kN
- Max. torque: 350 Nm
- Max. rotational speed: 1000 1/min
- Weight: 256 kg
Technical details
| 스핀들 유형 | ISO 702-2 |
|---|---|
| 스핀들 크기 | Nr. 15 |
| 톱니 | 각진 톱니 |
| 최대 회전 속도 [1/min] | 1000.0 |
| 최대 클램핑 포스 [kN] | 270.0 |
| 최대 토크 [Nm] | 350.0 |
| 스트로크/죠 [mm] | 15.0 |
| 톱니 피치 [mm] | 8.5 |
| 중량 [kg] | 256.0 |
Clamping force-RPM-diagram
Clamping force-RPM-diagram
- X-axis:
- n [min-1]
- Y-axis:
- Fsp [kN]
- brown
-
SHF 630
- red
-
SFA-AL 630
- yellow
-
SFA 630
- green
-
Required minimum clamping force Fspmin 33%
Scope of delivery
Chuck, 1 set of base jaws with screws, chuck mounting screws, actuation key, eye bolt and operating manual