AGM-Z 160L
ID 1575993
- Compensation direction: Z
- Compensation Z: 20 mm
Technische Details
| Corsa di compensazione Z [mm] | 20.0 |
|---|---|
| Forza di bloccaggio pos. ritratta [N] | 6700.0 |
| Forza di bloccaggio pos. estratta [N] | 9600.0 |
| Forza min. prodotta dalla molla [N] | 900.0 |
| Forza max. prodotta dalla molla [N] | 1400.0 |
| Pressione d'esercizio min. [bar] | 2.5 |
| Pressione di esercizio max. [bar] | 6.5 |
| Pressione d'esercizio nominale [bar] | 6.0 |
| Precisione di ripetibilità [mm] | 0.02 |
| Collegamento lato robot | ISO 9409-1-160-6-M10 |
| Collegamento lato utensile | ISO 9409-1-160-6-M10 |
| Peso [kg] | 25.2 |
| Temperatura ambiente min. [°C] | 5.0 |
| Temperatura ambiente max. [°C] | 60.0 |
| Consumo di fluido [cm³] | 850.0 |
| Tempo di estensione [s] | 0.5 |
| Tempo di rientro [s] | 0.8 |
| Collegamenti dell'aria bloccati e sbloccati | G1/8" |
| Carico eccentrico massimo [mm] | 650.0 |
| Classe di protezione IP | 50 |
| Coppia statica max Mx/My [Nm] | 1000.0 |
| Coppia statica max. Mz [Nm] | 1100.0 |
| Forza statica massima Fx/Fy [N] | 6000.0 |
| Forza statica massima Fz [N] | 6500.0 |
| Coppia dinamica max Mx/My [Nm] | 450.0 |
| Coppia dinamica max Mz [Nm] | 450.0 |
| Forza Fx massima dinamica [N] | 2750.0 |
| Forza Fy massima dinamica [N] | 2750.0 |
| Forza Fz massima dinamica [N] | 3500.0 |
| Forza max. Fd [N] | 13000.0 |
Max. loads
Diagramma di carico AGM-Z – struttura verticale
AGM-Z load diagram – horizontal structure
Deflection
AGM-Z deflection diagram – horizontal structure
Max. loads
This is the sum of all static loads that are permitted to act on the compensation unit.
Diagramma di carico AGM-Z – struttura verticale
- X-Achse:
- Distanza del baricentro
- Y-Achse:
- Capacità di carico
AGM-Z load diagram – horizontal structure
- X-Achse:
- Distance of the center of gravity
- Y-Achse:
- Load capacity
Deflection
AGM-Z deflection diagram – horizontal structure
- X-Achse:
- Distance of the center of gravity
- Y-Achse:
- Deflection
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Fluid consumption
refers to the air consumption per one retraction and extension cycle
Guidance system
Ball guides
Monitoring
via magnetic switch or inductive proximity sensor
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Housing
hard anodized aluminum alloy, functional parts made of hardened steel
Scope of delivery
Compensation unit in the ordered variant, elements for mechanical connection and safety information. Product-specific instructions can be downloaded at schunk.com/downloads-manuals.
Warranty
24 months