ELB 70-H050-I-B-N-N-H1G
ID 1488520
- Max. stroke: 50 mm
- Max. stroke: 50 mm
- Max. driving force: 150 N
Technical details
| Drive concept | Linear direct drive |
|---|---|
| Stroke [mm] | 50.0 |
| Max. driving force [N] | 150.0 |
| Nominal force [N] | 40.0 |
| Max. payload (horizontal) [kg] | 6.0 |
| Repeat accuracy [mm] | ± 0.01 |
| Max. speed [m/s] | 4.0 |
| Max. acceleration [m/s²] | 100.0 |
| Max. current [A] | 10.0 |
| Max. standstill current [A] | 2.6 |
| Min. ambient temperature [°C] | 10.0 |
| Max. ambient temperature [°C] | 40.0 |
| Weight [kg] | 2.36 |
| Clearance N (for moment load) [mm] | 34.1 |
| Stroke measuring system interface | Sin/Cos 1Vss |
| Actuation holding brake | pneumatic |
| Static holding force break [N] | 350.0 |
| Axial play, brake [mm] | 0.3 |
| Moment Mx max. [Nm] | 79.0 |
| Moment My max. [Nm] | 54.0 |
| Moment Mz max. [Nm] | 27.0 |
| Force Fy max. [N] | 1210.0 |
| Force Fz max. [N] | 1210.0 |
| Force -Fz max. [N] | 1210.0 |
| Version with incremental path-measuring system | yes |
| H1 grease version | yes |
| Version with holding brake | yes |
Dimensions and maximum loads
Travel times for 50/75 mm stroke*
Travel times for 125 mm stroke*
Dimensions and maximum loads
The indicated torques and forces are maximum values for static load in order to achieve the maximum lifespan of the product. Depending on use, increased loads are possible; please contact us to find out more!
Travel times for 50/75 mm stroke*
- X-axis:
- Stroke
- Y-axis:
- Travel times
Travel times for 125 mm stroke*
- X-axis:
- Stroke
- Y-axis:
- Travel times
General notes about the series
Repeat accuracy
defined as the spread of the target position after 100 consecutive positioning cycles under constant conditions.
Ambient conditions
The modules are mainly designed for the use in clean ambient conditions. Please note that the life time of the modules can shorten if they are used in harsh ambient conditions, and that SCHUNK cannot assume liability in such cases. Please contact us for assistance.
Layout or control calculation
Verifying the sizing of the selected unit is necessary, since otherwise overloading can result. Please contact us for assistance.
Payload
is the weight of the total weight which is attached to the cantilever arm. Please consider that service life will shorten if the maximum payload is exceeded. SCHUNK cannot assume any warranty for this.
Guida
Guida con cuscinetti a rulli
Azionamento
Azionamento lineare diretto basato su un motore lineare sincrono AC trifase commutato elettronicamente e a eccitazione permanente
Sistema di misurazione della corsa
Sistema magnetico di misurazione senza contatto con varianti incrementale e assoluta; con interfacce HIPERFACE®, 1Vss e DRIVE-CLiQ.
Profilo
Profilo in alluminio con guida con rulli incrociati precaricati senza gioco
Slitta
Slitte in alluminio, elemento primario e testina di lettura del sistema di misurazione direttamente integrati
La fornitura comprende
Informazioni sulla sicurezza (istruzioni specifiche del prodotto disponibili online)
Regolatore di azionamento
Consulenza sulle impostazioni dei parametri per i regolatori di azionamento BOSCH (IndraDrive, IndraDrive CS) e Siemens (Sinamics S120). Fornitura di schede tecniche dei motori per altri controller di azionamento. Supporto alla messa in funzione su richiesta.
Garanzia
24 mesi
Caratteristiche di vita utile
Su richiesta