B 100-D-SSS-M-2005-SL
Universal linear axis
Inquire now
This product can only be requested online.
Universal linear axis Beta, Size: 100, electrical, Spindle drive, Rail guide
- Max. stroke: 5200 mm
- Max. driving force: 4000 N
Technical details
| Max. stroke H [mm] | 5200.0 |
|---|---|
| Max. driving force [N] | 4000.0 |
| Repeat accuracy [mm] | ± 0.03 |
| Max. total length [mm] | 5600.0 |
| Max. speed [m/s] | 0.25 |
| Max. acceleration [m/s²] | 20.0 |
| Min. ambient temperature [°C] | 0.0 |
| Max. ambient temperature [°C] | 80.0 |
| Dead weight of base including slide [kg] | 7.25 |
| Additional mass per 100 mm stroke [kg] | 0.75 |
| Weight of slide [kg] | 4.0 |
| Slide plate length [mm] | 270.0 |
| Guidance system | Rail guide |
| Number of rails | 2.0 |
| Size of rails | 15 |
| Drive concept | Spindle drive |
| Idle torque [Nm] | 1.3 |
| Moment of inertia [kgm²] | 8.4E-5 |
| Spindle diameter [mm] | 20.0 |
| Spindle pitch [mm] | 5 |
| Max. spindle speed [1/min] | 3000.0 |
| Length X [mm] | 400.0 |
| Width Y [mm] | 100.0 |
| Height Z [mm] | 85.0 |
| Moment Mx max. [Nm] | 350.0 |
| Moment My max. [Nm] | 1000.0 |
| Moment Mz max. [Nm] | 1000.0 |
| Force Fy max. [N] | 1800.0 |
| Force Fz max. [N] | 4000.0 |
| Force -Fz max. [N] | 3000.0 |
Please note that the long slide plates and the use of spindle supports (SA) reduce the maximum stroke H.
SCHUNK standard spindle supports with noise damping (SAG) reduce the maximum stroke by 10 mm for every 2 SAG.
Please note that the moment of inertia for spindle axes refers to one meter.
SCHUNK standard spindle supports with noise damping (SAG) reduce the maximum stroke by 10 mm for every 2 SAG.
Please note that the moment of inertia for spindle axes refers to one meter.
치수 및 최대 로드
스핀들 지지대**
치수 및 최대 로드
표시된 힘과 모멘트는 개별 로딩의 최대값입니다. 몇 가지 힘 및/또는 모멘트가 동시에 적용되면 최대 허용 개별 값은 더 낮아집니다.
스핀들 지지대**
- X-axis:
- 축 길이
- Y-axis:
- 회전 속도
**도면은 스핀들 지지대의 속도(SA)와 유닛의 전체 길이에 따른 최대 스핀들 속도를 나타냅니다.
시리즈에 관한 일반 참고 사항
주변 환경
모듈은 주로 청결한 주변 조건에서 사용하도록 디자인되었습니다. 열악한 주변 조건에서 사용할 경우 모듈의 수명이 단축될 수 있으며, 그러한 경우 SCHUNK는 신뢰성에 대해 책임을 질 수 없음을 참고해 주십시오. 도움이 필요하신 경우 문의해 주십시오.
최대 스트로크
최대로 허용 가능한 스트로크입니다. 가속과 제동 거리 또는 초과 가능성을 고려해야 합니다.
반복 정밀도
일정 조건에서 100회의 연속 위치 결정 사이클 후 대상 위치의 분포로 정의됩니다.
가속 및 속도
지정된 값은 로딩이 있는 유닛의 최대값입니다. 적용분야를 위한 실제 가속과 속도는 별도로 디자인되어야 하고 최대값에서 떨어져 있어야 합니다.
레이아웃 또는 컨트롤 계산
선택 유닛의 크기 검증은 필요합니다. 만약 그렇지 않으면 오버로드가 발생할 수 있습니다. 도움이 필요하신 경우 문의해 주십시오.
작동 원리
톱니 벨트 또는 볼스크류 스핀들 드라이브 선택
드라이브
다른 공급업체의 서보모터도 문제없이 적용 가능
프로필
플라스틱 커버 스트립과 함께 돌출된 알루미늄 프로필
슬라이드
브러시 씰이 있는 알루미늄 슬라이드
제공 범위
법인 선언서가 포함된 조립 및 사용 설명서
보증
24개월