SWK-007-000-000-IN03
ID 1405836
- Verifica della corsa del pistone: integrata
- Numero dei passaggi fluidi: 5
- Carico utile totale max.: 16 kg
Specifiche tecniche
| Peso consigliato di movimentazione [kg] | 16.0 |
|---|---|
| Verifica della corsa del pistone | integrata |
| Coppia Mx max [Nm] | 61.0 |
| Coppia My max. [Nm] | 61.0 |
| Coppia Mz max [Nm] | 38.0 |
| Forza di bloccaggio [N] | 1100.0 |
| Precisione di ripetibilità [mm] | 0.015 |
| Peso [kg] | 0.16 |
| Distanza max. nel bloccaggio [mm] | 1.5 |
| Filettatura del collegamento dell'aria del passante pneumatico | 5x M5 |
| Blocco/sblocco collegamento principale | M5 |
| Disassamento massimo consentito XY [mm] | ± 1 |
| Offset angolare max. consentito [°] | ± 2 |
| Collegamento lato robot | ISO 9409-1-31.5-4-M5 |
| Temperatura ambiente min. [°C] | 5.0 |
| Temperatura ambiente max. [°C] | 60.0 |
| Pressione d'esercizio min. [bar] | 4.5 |
| Pressione di esercizio max. [bar] | 6.9 |
| Lunghezza X [mm] | 54.5 |
| Larghezza Y [mm] | 45.5 |
| Altezza Z [mm] | 28.4 |
| Diagramma di collegamento viti | S7 |
Dimensioni e carichi massimi
Dimensioni e carichi massimi
Si tratta della somma massima di tutti i carichi che possono agire sul sistema di cambio senza che il perfetto funzionamento ne risenta.
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Operating principle
locking balls actuated by pistons for locking
Media transmission
variable via attachment feed-through modules, depending on the unit size
Housing
The housing consists of high-strength, hard-coated aluminum alloy. The functional components are made of hardened steel.
Warranty
24 months
Service life characteristics
on request