FTS 085-2400-70
ID 1598248
- Plage de mesure Fx, Fy: ± 1000 N
- Plage de mesure Fz: ± 2400 N
- Plage de mesure Mx, My: ± 70 Nm
- Plage de mesure Mz: ± 70 Nm
- Indice de protection IP: 67
Technical details
| Poids [kg] | 0.65 |
|---|---|
| Indice de protection IP | 67 |
| Plage de mesure Fx, Fy [N] | ± 1000 |
| Plage de mesure Fz [N] | ± 2400 |
| Plage de mesure Mx, My [Nm] | ± 70 |
| Plage de mesure Mz [Nm] | ± 70 |
| Résolution Fx, Fy [N] | 0.05 |
| Résolution Fz [N] | 0.096 |
| Résolution Mx, My [Nm] | 0.0028 |
| Résolution Mz [Nm] | 0.0021 |
| Ecart relatif par rapport à la plage de mesure | <1,0 %-fs |
| écart max. Fx, Fy [N] | 10.0 |
| écart max. Fz [N] | 24.0 |
| écart max. Mx, My, Mz [Nm] | 0.7 |
| Taux d'échantillonnage max. [Hz] | 1000.0 |
| Fréquence maximale (UDP) [Hz] | 2000.0 |
| Informations sur les accessoires | En plus du capteur FTS, un câble et un boîtier interface sont nécessaires |
Dimensões e cargas máximas
Dimensões e cargas máximas
Todas as forças e torques que atuam no sensor devem estar dentro da faixa de medição especificada.
Exceder a faixa de medição reduzirá o número máximo de ciclos de carga e poderá causar danos ao sensor. Entre em contato conosco se sua aplicação exceder a faixa de medição.
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Measuring accuracy
< 1% of the upper limit value of the measuring range at 22 °C
Splash water protection
IP67 as standard
Housing
Aluminum and stainless steel
Warranty
24 months