arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
WEL SCAPTO C4 Ø14x55 Illustration similar

WEL SCAPTO C4 Ø14x55

WELDON end mill holders

ID 23004399

WEL SCAPTO C4 Ø14x55, Toolholders
  • WELDON end mill holders
  • Series: WELDON
  • Toolholder interface: SCHUNK CAPTO C4
  • Clamping diameter: 14 mm
  • Projecting length: 55 mm
  • Run-out accuracy: ≤ 0.003 mm measured from taper to D1
  • Balancing grade: G2.5 at 25,000 RPM or Umax < 1 gmm
Scope of delivery: Including WELDON clamping screw
Technology WELDON end mill holders
Series WELDON
Toolholder interface SCHUNK CAPTO C4
Toolholder standard ISO 26623-1
Clamping diameter D1 14 mm
D2 [mm] 44.0
D6 [mm] 31.5
Projecting length L1 [mm]/[inch] 55 mm / 2.2"
L2 [mm] 48.0
L4 [mm] 32.5
G1 M12
Weight [kg] 0.56
Coolant-proof yes
Standard length yes
These product variants are suitable for both milling as well as turning centers

型号
用于夹持圆柱柄的刀具,符合 DIN 1835B/6359HB 标准

回转精度
从锥体到 D1 测量 ≤ 0.003 mm

平衡等级
转速为 25,000 RPM 时动平衡等级达到 G2.5 或 Umax < 1 gmm

螺纹 G1
G1 = 夹紧螺钉的螺纹

RAM 数据采集器
符合 DIN 69873 规定的钻孔用于安装数据芯片

刀柄更换
对于自动更换刀柄

标配范围
含 WELDON 侧固式夹持螺钉

单独
可按照客户要求,提供其他尺寸和订制设计