arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
Individual modules NSE mini

Individual modules NSE mini

Clamping Modules
Quick-change pallet modules of the VERO-S NSE mini series are made of stainless steel and are used for easy milling applications.

Advantages – Your benefits

  • SCHUNK modular system
    Innumerable combinations of standard clamping devices to suit all different types of machines
  • Low height design
    Expands your machine's workspace
  • All pneumatic modules can be operated at a system pressure of 6 bar
    Additional pressure intensifiers are not required
  • Positioning via short taper
    Very easy joining process at a repeat accuracy of < 0.005 mm
  • Patented dual stroke system for highest pull-down forces
    Therefore extremely rigid clamping without vibrations
  • Form-fit, self-retained locking
    Full pull-down force is maintained even in the event of a pressure drop
  • Corrosion-free stainless steel design
    Long life time and maximum process reliability
  • Turbo integrated by default
    Pull-down force increased up to 300% for optimal utilization of the machine's performance, hence high efficiency.
  • One consistent clamping pin size for all NSE mini-modules
    No danger of confusion or incorrect operation
  • Integrated slide monitoring
    Can be used in automated applications

Options and special information

  • The extremely flat, pneumatic quick-change pallet system
    VERO-S NSE mini is used for smaller applications and is the optimum complement to the largest modular system from SCHUNK. Only 20 mm in height, this module extends the VERO-S range from SCHUNK with an extremely flat quick-change pallet system. The NSE mini disposes of lower pull down forces than the NSE3, and is particularly suitable for light cutting tasks.
  • The NSE mini 90 makes it possible to implement highly flexible, smallest and variable gauges for bore holes. Therefore the module is an expert for workpiece direct clamping, pallet clamping and handling. At a height of only 20 mm, it enables maximum use of the machine room in smaller machine tools and can be quickly and easily retrofitted.