arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
CELSIO SCAPTO C4 Ø18x80 图片仅供参考

CELSIO SCAPTO C4 Ø18x80

热缩刀柄

IDnr. 26002841

Levertijd op aanvraag
CELSIO SCAPTO C4 Ø18x80, 刀柄
  • 热缩刀柄
  • 系列: CELSIO
  • 刀具夹持接口: SCHUNK CAPTO C4
  • 夹持直径: 18 mm
  • 突出长度: 80 mm
  • 回转精度: 在夹持孔中测量值 ≤ 0.003 mm(根据 DIN 69882-8 标准)
  • 平衡等级: 转速为 25,000 RPM 时动平衡等级达到 G2.5 或 Umax < 1 gmm
  • 最小扭矩: 370 Nm
技术 热缩刀柄
系列 CELSIO
刀具夹持接口 SCHUNK CAPTO C4
刀柄标准 ISO 26623-1
夹持直径 D1 18 mm
D2 [mm] 41.4
D6 [mm] 33.0
伸出长度 L1 [mm]/[英寸] 80 mm / 3.1"
L2 [mm] 50.0
L3 [mm] 10.0
L4 [mm] 57.5
G M12x1
最小扭矩 [Nm] 370.0
重量 [kg] 0.8
防冷却剂 是
标准长度 是
此类产品型号适用于铣削和车削中心

Run-out accuracy
≤ 0.003 mm measured in the clamping bore (according to DIN 69882-8)

Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm

Tool shank quality
h6

Data carriers
Bore holes for data carriers according to DIN 69873

Toolholder changes
For automatic toolholder changes

Length-setting screw
With adjustment screw for axial length adjustment

Balancing screw
With thread for balancing screws

Individual
Additional sizes and customized designs are available upon request