ELB 70-H125-H-N-L-N
ID 315443
- Max. stroke: 125 mm
- Max. stroke: 125 mm
- Max. driving force: 150 N
Información técnica
| Drive concept | Linear direct drive |
|---|---|
| Stroke [mm] | 125.0 |
| Max. driving force [N] | 150.0 |
| Nominal force [N] | 40.0 |
| Max. payload (horizontal) [kg] | 6.0 |
| Repeat accuracy [mm] | ± 0.01 |
| Max. speed [m/s] | 4.0 |
| Max. acceleration [m/s²] | 100.0 |
| Max. current [A] | 10.0 |
| Max. standstill current [A] | 2.6 |
| Min. ambient temperature [°C] | 10.0 |
| Max. ambient temperature [°C] | 40.0 |
| Weight [kg] | 3.02 |
| Clearance N (for moment load) [mm] | 34.1 |
| Stroke measuring system interface | HIPERFACE® |
| Load compensation implementation | MagSpring® |
| Load compensation constant force [N] | 22.0 |
| Length X [mm] | 355.3 |
| Width Y [mm] | 129.7 |
| Height Z [mm] | 46.5 |
| Moment Mx max. [Nm] | 101.0 |
| Moment My max. [Nm] | 68.0 |
| Moment Mz max. [Nm] | 34.0 |
| Force Fy max. [N] | 1480.0 |
| Force Fz max. [N] | 1480.0 |
| Force -Fz max. [N] | 1480.0 |
Dimensions and maximum loads
Travel times for 50/75 mm stroke*
Travel times for 125 mm stroke*
Dimensions and maximum loads
The indicated torques and forces are maximum values for static load in order to achieve the maximum lifespan of the product. Depending on use, increased loads are possible; please contact us to find out more!
Travel times for 50/75 mm stroke*
- Eje X:
- Stroke
- Eje Y:
- Travel times
Travel times for 125 mm stroke*
- Eje X:
- Stroke
- Eje Y:
- Travel times
General notes about the series
Repeat accuracy
defined as the spread of the target position after 100 consecutive positioning cycles under constant conditions.
Ambient conditions
The modules are mainly designed for the use in clean ambient conditions. Please note that the life time of the modules can shorten if they are used in harsh ambient conditions, and that SCHUNK cannot assume liability in such cases. Please contact us for assistance.
Layout or control calculation
Verifying the sizing of the selected unit is necessary, since otherwise overloading can result. Please contact us for assistance.
Payload
is the weight of the total weight which is attached to the cantilever arm. Please consider that service life will shorten if the maximum payload is exceeded. SCHUNK cannot assume any warranty for this.
ガイド
クロスローラーガイド
駆動方式
電子的に整流および励磁される AC 同期リニアモーターによる 3 相交流式リニアダイレクトドライブ
ストローク測定システム
非接触式磁気計測システム、増分仕様および絶対値仕様バリエーション。HIPERFACE®、1Vss、DRIVE-CLiQ インターフェースに対応。
プロファイル
遊びのない予圧接合ローラーガイドを備えたアルミニウムプロファイル
スライダー
アルミニウム製スライダー、主要部および計測システム読み取りヘッドを直接統合
納品内容
安全に関する情報（オンラインで入手可能な製品固有の説明書）
ドライブコントローラー
BOSCHのドライブコントローラ（EcoDrive CS、IndraDrive、IndraDrive CS）およびSiemens のドライブコントローラ（Sinamics S120）のパラメータ設定に関するご相談。他のドライブコントローラ用モータデータシートの提供。ご要望に応じた委託サポート。
保証
24 カ月
寿命特性
ご要望によって