arrow calendar cartcheck checkmark close configure contact cube danger download external_link facebook globeimage info instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus refresh rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
国の選択を変更して、お住まいの地域に関連する製品、サービス、および担当者に関する情報を表示します。
EZN 100 Illustration similar

EZN 100

Universal gripper

ID 306112

お気軽にお問合せください
今すぐお問い合わせください
この製品はオンラインでのみお求めいただけます。
Universal gripper EZN, Size: 100, electrical, Communication interface: See controller ECM

  • Stroke per jaw: 10 mm
  • Min. gripping force: 300 N
  • Max. gripping force: 800 N
  • Power supply: 24 V
  • Max. total current: 4 A
  • Max. ambient temperature: 55 °C
片側ストローク [mm] 10.0
最小把持力 [N] 300.0
最大把持力 [N] 800.0
推奨ワーク重量 [kg] 4.0
最大許容フィンガー長 [mm] 125.0
最大許容重量/フィンガー [kg] 1.1
繰り返し精度 [mm] ± 0.01
最小エアパージ圧力 [bar] 0.5
最大エアパージ圧力 [bar] 1.0
閉時間 [s] 0.4
開時間 [s] 0.4
最大速度 [mm/s] 80.0
最大加速度 [mm/s²] 1500.0
重量 [kg] 2.3
最低周囲温度 [°C] 5.0
最高周囲温度 [°C] 55.0
IP 保護等級 41
D 径 [mm] 110.5
高さ Z [mm] 147.5
定格電流 [A] 2.2
最大電流 [A] 4.0
電子コントローラー 外付け
コントローラータイプ ECM-EZN100
通信インターフェース コントローラー ECM を参照
モーメント Mx 最大 [Nm] 80.0
トルク My 最大 [Nm] 115.0
モーメント Mz最大 [Nm] 70.0
最大軸方向力 Fz (最大) [N] 2000.0
ECM コントローラーには 5 m の接続ケーブルが付属する標準タイプの他に EZN-S プラグタイプがあります。このタイプでは、グリッパーは 30 cm のケーブルと段付き Y プラグを備えています。ケーブルトラック用またはロボット用の電源ケーブルおよびセンサーケーブルを別途購入する必要があります。

General notes about the series

Gripping force
is the arithmetic sum of the individual force applied to each jaw at distance P (see illustration).

Finger length
is measured from the reference surface as the distance P in direction to the main axis.

Repeat accuracy
is defined as a distribution of the end Position for 100 consecutive strokes.

Workpiece weight
is calculated for force-fit gripping with a coefficient of static friction of 0.1 and a safety factor of 2 against workpiece slippage at acceleration due to gravity g. For form-fit or capture gripping, there are significantly higher permissible workpiece weights.

Closing and opening times
Minimum closing and opening times are merely the movement times of the base jaws or fingers at max. speed, max. acceleration, without current limitation (maximum current), and observance of the maximum permissible mass per finger.

Nominal currents
can be permanently actuated. With regard to all the currents which are ranging above the nominal current up to the maximum current, the notes of the individual product documentation has to be respected.

Operating principle
Wedge-hook kinematics

Housing material
Aluminum alloy, coated

Base jaw material
Steel

Actuation
servo-electric, via brushless DC servomotor and spindle drive

Warranty
24 months

Service life characteristics
on request

Scope of delivery
Gripper including safety information and accessory kit with centering sleeves for gripper and finger mounting. Product-specific instructions and software can be downloaded at schunk.com/downloads-manuals and schunk.com/downloads-software.