arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.

Face Mill Arbors

Mechanical Toolholding Systems

Face mill arbors are suitable for clamping end face mills and face mills, with crosswise slot in accordance with DIN 1880, from clamping diameter Ø 40 in accordance with DIN 2079 (four threaded holes). Due to the enlarged contact surface, milling cutters with a crosswise slot can be clamped quickly. The clamping screw and driving keys are included in the scope of delivery.
All filters
147 results
Face Mill Arbors

Face Mill Arbors

Face mill arbors are suitable for clamping end face mills and face mills, with crosswise slot in accordance with DIN 1880, from clamping diameter Ø 40 in accordance with DIN 2079 (four threaded holes). Due to the enlarged contact surface, milling cutters with a crosswise slot can be clamped quickly. The clamping screw and driving keys are included in the scope of delivery.
Show series
Face mill arbors Cool Flow

Face mill arbors Cool Flow

Face mill arbors with front coolant supply are suitable for clamping end face mills and face mills with internal cooling, with crosswise slot in accordance with DIN 1880, from clamping diameter Ø 40 in accordance with DIN 2079 (four threaded holes). Due to the enlarged contact surface, milling cutters with a crosswise slot can be clamped quickly. The clamping screw and driving keys are included in the scope of delivery.
Show series
Face Mill Arbors Dual Contact

Face Mill Arbors Dual Contact

Face mill arbors with simultaneous taper and flat work surface close the interface-related gap between tool flange and the front of the machine spindle with the interface of the flat work surface. They are suitable for clamping end face mills and face mills, with crosswise slot in accordance with DIN 1880, from clamping diameter Ø 40 in accordance with DIN 2079 (four threaded holes). Due to the enlarged contact surface, milling cutters with a crosswise slot can be clamped quickly. The clamping screw and driving keys are included in the scope of delivery.
Show series