arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitter userwarning wechat xing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.

Heat Shrinking Toolholders

CELSIO

up to 450 Nm torque at Ø 20

Description

CELSIO, a heat shrinking system for all types of shrinking devices.
When applying heat shrinking technology for thermal tool clamping, the tool shank is shrunk in the heated tool mounting. An inductive coil creates rapidly changing eddy currents which act on the heat shrinking toolholder directly and apply concentric to the precise point where the tool shank will be inserted. The result is an almost homogeneous unit, as if the heat shrinking toolholder and tool are a single piece.

Advantages – Your benefits

High clamping forces
Safe and friction-locked clamping for transmission of high torques
Good ratio between radial rigidity and interfering contour
High machine-cutting performance and quicker machining times for increased productivity
Toolholder for powerful metal cutting
High-speed machining of machine speeds up to 50,000 RPM and for use of HSS and HM tools
Run-out accuracy ≤ 0.003 mm measured according to DIN 69882-8 in the clamping bore
Optimum surface results, high precision processing and safe processes due to uniform cutting action and highest reproducibility
Universally applicable
Suitable for use in milling, finish milling, drilling or HSC machining
Dynamic form
With long toolholders, the reinforced shank offers an effective compromise between slimness and sturdiness
High degree of flexibility
Can be ideally combined with CELSIO SVL heat shrinking extensions
Read more Read less

Digital services forCELSIO

Matching with the product CELSIO, we offer various digital services – the perfect complement for maximum efficiency, planning and process reliability.

508 Products found

  • Technology  Heat Shrinking Toolholders
  • Series  CELSIO
  • Toolholder interface  HSK-A 63
  • Toolholder standard  DIN ISO 12164-1
  • Clamping diameter D1  3 mm
  • D2  14 mm
More product information Less product information
  • Technology  Heat Shrinking Toolholders
  • Series  CELSIO
  • Toolholder interface  HSK-A 63
  • Toolholder standard  DIN ISO 12164-1
  • Clamping diameter D1  3 mm
  • D2  18 mm
More product information Less product information
  • Technology  Heat Shrinking Toolholders
  • Series  CELSIO
  • Toolholder interface  HSK-A 63
  • Toolholder standard  DIN ISO 12164-1
  • Clamping diameter D1  4 mm
  • D2  15 mm
More product information Less product information
  • Technology  Heat Shrinking Toolholders
  • Series  CELSIO
  • Toolholder interface  HSK-A 63
  • Toolholder standard  DIN ISO 12164-1
  • Clamping diameter D1  4 mm
  • D2  19 mm
More product information Less product information
  • Technology  Heat Shrinking Toolholders
  • Series  CELSIO
  • Toolholder interface  HSK-A 63
  • Toolholder standard  DIN ISO 12164-1
  • Clamping diameter D1  5 mm
  • D2  16 mm
More product information Less product information
  • Technology  Heat Shrinking Toolholders
  • Series  CELSIO
  • Toolholder interface  HSK-A 63
  • Toolholder standard  DIN ISO 12164-1
  • Clamping diameter D1  5 mm
  • D2  20 mm
More product information Less product information
  • Technology  Heat Shrinking Toolholders
  • Series  CELSIO
  • Toolholder interface  HSK-A 63
  • Toolholder standard  DIN ISO 12164-1
  • Clamping diameter D1  6 mm
  • D2  18 mm
More product information Less product information
  • Technology  Heat Shrinking Toolholders
  • Series  CELSIO
  • Toolholder interface  HSK-A 63
  • Toolholder standard  DIN ISO 12164-1
  • Clamping diameter D1  6 mm
  • D2  22 mm
More product information Less product information
  • Technology  Heat Shrinking Toolholders
  • Series  CELSIO
  • Toolholder interface  HSK-A 63
  • Toolholder standard  DIN ISO 12164-1
  • Clamping diameter D1  8 mm
  • D2  20 mm
More product information Less product information
  • Technology  Heat Shrinking Toolholders
  • Series  CELSIO
  • Toolholder interface  HSK-A 63
  • Toolholder standard  DIN ISO 12164-1
  • Clamping diameter D1  8 mm
  • D2  24 mm
More product information Less product information
  • Technology  Heat Shrinking Toolholders
  • Series  CELSIO
  • Toolholder interface  HSK-A 63
  • Toolholder standard  DIN ISO 12164-1
  • Clamping diameter D1  10 mm
  • D2  22 mm
More product information Less product information
  • Technology  Heat Shrinking Toolholders
  • Series  CELSIO
  • Toolholder interface  HSK-A 63
  • Toolholder standard  DIN ISO 12164-1
  • Clamping diameter D1  10 mm
  • D2  26 mm
More product information Less product information
  • Technology  Heat Shrinking Toolholders
  • Series  CELSIO
  • Toolholder interface  HSK-A 63
  • Toolholder standard  DIN ISO 12164-1
  • Clamping diameter D1  12 mm
  • D2  24 mm
More product information Less product information
  • Technology  Heat Shrinking Toolholders
  • Series  CELSIO
  • Toolholder interface  HSK-A 63
  • Toolholder standard  DIN ISO 12164-1
  • Clamping diameter D1  12 mm
  • D2  28 mm
More product information Less product information
  • Technology  Heat Shrinking Toolholders
  • Series  CELSIO
  • Toolholder interface  HSK-E 40
  • Toolholder standard  DIN 69893-5
  • Clamping diameter D1  3 mm
  • D2  14 mm
More product information Less product information
  • Technology  Heat Shrinking Toolholders
  • Series  CELSIO
  • Toolholder interface  HSK-E 40
  • Toolholder standard  DIN 69893-5
  • Clamping diameter D1  3 mm
  • D2  10 mm
More product information Less product information
  • Technology  Heat Shrinking Toolholders
  • Series  CELSIO
  • Toolholder interface  HSK-E 40
  • Toolholder standard  DIN 69893-5
  • Clamping diameter D1  3 mm
  • D2  15 mm
More product information Less product information
  • Technology  Heat Shrinking Toolholders
  • Series  CELSIO
  • Toolholder interface  HSK-E 40
  • Toolholder standard  DIN 69893-5
  • Clamping diameter D1  3 mm
  • D2  16 mm
More product information Less product information