SLD
Funzionamento
Sectional diagram
Sectional diagram
The electric drive consists of a primary part (motor coil) and a secondary part (permanent magnets). The phase and the amplitude of the applied electrical current are regulated in the controller. Depending on the application, this sets the profile fitted with magnets in motion or moves the slides of the axis.
- 1
-
Aluminum extruded profile
Flat and weight-optimized - 2
-
Pre-loaded profiled rail guide with recirculating ball-bearing guides
for optimal guidance properties and speeds - 3
-
Integrated secondary parts
with high power magnets - 4
-
Compact primary part slide
with mounting surfaces, guidance adjusted without play and integrated measuring system - 5
-
End plates
with integrated shock absorber elements - 6
-
Motor plug
Position right/left can be selected - 7
-
Measuring system plug
Position right/left can be selected
Sizing assistant and configuration for customized linear axes
Design of the linear direct axis
Sistema transductor modular
Freno di arresto pneumatico
Catena portacavi
Covering tape
Certificación UL
Versión de servicio pesado/variante de alta velocidad
Sizing assistant and configuration for customized linear axes
The SCHUNK sizing assistants make it easy to reliably select the right specific products from the portfolio for each application. With our configurable standard products, we reduce complexity in system planning and offer a large number of individual adaptation options. In just a few clicks, linear axes can be adapted to individual requirements in less than 10 minutes, opening up an even wider range of applications. In addition to configurable standard products, SCHUNK Engineering offers customized solutions – feel free to contact us!
Design of the linear direct axis
The linear direct axis SLD consists of a motor slide with an integrated primary component and a measuring system. The secondary component consists of permanent magnets and is integrated into the aluminum extruded profile of the linear axis.
- 1
-
Aluminum extruded profile
- 2
-
Permanent magnets
- 3
-
Motor slide
Sistema transductor modular
El eje lineal está disponible con diferentes sistemas de medición de trayectoria. El sistema de medición de trayectoria incremental tiene una interfaz 1Vss. Los sistemas de medición de trayectoria absolutos están disponibles opcionalmente con las interfaces HIPERFACE®, HIPERFACE DSL®, DRIVE-CLiQ o EnDat 2.2. Previa solicitud hay otras interfaces disponibles.
- 1
-
Cabezal de lectura del sistema de medición, fijado en la corredera del motor
- 2
-
Nastro del sistema di misurazione, fissato sul profilo estruso in alluminio
Freno di arresto pneumatico
In opzione, l'asse lineare può essere fornito con un freno di arresto di sicurezza. Il freno di arresto è ad azionamento pneumatico. La sua funzione viene attivata in stato non ventilato. Il freno di arresto viene utilizzato per mantenere la posizione dell'asse lineare in assenza di corrente. Il freno di stazionamento è adatto anche per applicazioni nel campo della sicurezza delle macchine. Non esitate a contattarci.
- 1
-
Freno di arresto, ad azionamento pneumatico
Catena portacavi
Le catene di trascinamento abbinate sono disponibili come accessori degli assi lineari (Simile all'illustrazione). Si adattano alla corsa utile rispettiva, nella cui fornitura è compreso il materiale di montaggio e, se necessario, pre-assemblato.
- 1
-
Drag chain
Covering tape
Optionally, the linear axis can be delivered equipped with a covering tape. This prevents dirt from entering the inside of the axis and at the same time prevents grease from escaping when the axis is mounted horizontally or vertically.
- 1
-
Cinta de cobertura
Certificación UL
El motor del eje lineal directo cuenta con certificación UL de forma estándar. La marca de seguridad UL permite un acceso rápido al mercado de Norteamérica y de otros países. Las certificaciones UL se conceden en función de cada producto y se revisan periódicamente por UL. No solo se prueba el producto final, sino también la fabricación del producto.
Versión de servicio pesado/variante de alta velocidad
El eje SLD está disponible en versión de alta resistencia para aplicaciones con mayores requisitos en cuanto a capacidad de carga básica, rigidez e intervalos de lubricación. A partir del tamaño SLD 22, el raíl perfilado se sustituye por una versión de mayor tamaño con mayores capacidades de carga básica, y tanto el perfil extruido como las guías se adaptan en consecuencia.
Basada en la versión de alta resistencia, existe una variante de alta velocidad con velocidades de hasta 10 m/s.
Ejemplo de aplicación
Ejemplo de aplicación
Unidad de manipulación altamente flexible para la colocación rápida y precisa de horquillas en un estator para la producción automatizada de motores eléctricos.
- 1
-
Eje directo lineal SLD
- 2
-
Eje lineal universal LDN
- 3
-
Gripper paralelo de dos dedos PGN-plus-P