EMH-RP 084-B
ID 1351496
- Napájení: 24 V
- Oblast magnetu: 41.25 cm²
- Magnetický obvod: 6.1 A
- Max. okolní teplota: 50 °C
Technical details
| Přídržná síla [N] | 5370.0 |
|---|---|
| Oblast magnetu [cm²] | 41.25 |
| Užitečné zatížení u horizontální plochy magnetu [kg] | 89.0 |
| Užitečné zatížení u vertikální plochy magnetu [kg] | 35.0 |
| Zvýšení teploty modulu při 5 aktivacích za minutu [°C] | 14.0 |
| Zvýšení teploty modulu při 15 aktivacích za minutu [°C] | 37.0 |
| Doba aktivace [ms] | 500.0 |
| Min. okolní teplota [°C] | 5.0 |
| Max. okolní teplota [°C] | 50.0 |
| Vlastní hmotnost [kg] | 6.5 |
| Třída ochrany IP | 52 |
| Jmenovité napětí [V] | 24.0 |
| Typ napětí | DC |
| Max. výstupní výkon [A] | 6.1 |
| Logika jmenovitého proudu [A] | 0.15 |
| Řídicí elektronika | integrované |
| Délka X [mm] | 128.0 |
| Šířka Y [mm] | 128.0 |
| Výška Z [mm] | 157.0 |
Dimensions and maximum loads
Tloušťka obrobku
Vzduchová mezera
温度上升
Dimensions and maximum loads
Tloušťka obrobku
- X-axis:
- Tloušťka obrobku
- Y-axis:
- Přídržná síla
Vzduchová mezera
- X-axis:
- Vzduchová mezera
- Y-axis:
- Přídržná síla
温度上升
- X-axis:
- Activations
- Y-axis:
- Increase in temperature
General notes about the series
Layout or control calculation
Verifying the sizing of the selected unit is necessary, since otherwise overloading can result. Please contact us for assistance.
Activation time
The activation time is the time required to reverse the polarity of the permanent magnets.
Ambient conditions
The modules are primarily designed for the use in clean to slightly contaminated environments. Please note that the life time of the modules can shorten if they are used in harsh ambient conditions, and that SCHUNK cannot assume liability in such cases.
Operating principle
Magnetization of permanent magnets
Housing material
Aluminum/steel
Base jaw material
Steel
Actuation
Electrical current pulse for activation and deactivation of the system
Warranty
24 months
Service life characteristics
on request
Scope of delivery
Assembly and Operating Manual with Declaration of Incorporation, centering sleeves