WEL BT-DC 40 Ø16x63
WELDON エンドミルホルダー
ID 1415497
WEL BT-DC 40 Ø16x63, ツールホルダー
- WELDON エンドミルホルダー
- シリーズ: WELDON
- 二重接触モデル
- ツールバーインターフェース: BT-DC 40
- クランプ径: 16 mm
- 突出長さ: 63 mm
- 振れ精度: ≤ 0.003 mm、テーパーから D1 まで
- バランスグレード: 25,000 RPM または Umax < 1 gmm 時に G2.5
技術的詳細
| Technology | WELDON end mill holders |
|---|---|
| Series | WELDON |
| Toolholder interface | BT-DC 40 |
| Clamping diameter D1 | 16 mm |
| D2 [mm] | 48.0 |
| D6 [mm] | 35.5 |
| Projecting length L1 [mm]/[inch] | 63 mm / 2.5" |
| L2 [mm] | 51.0 |
| L4 [mm] | 36.0 |
| G1 | M14 |
| Weight [kg] | 1.35 |
| Dual Contact variant | yes |
| Coolant-proof | yes |
| Standard length | yes |
Version
For clamping tools with cylindrical shanks in accordance with DIN 1835B/6359HB
Run-out accuracy
≤ 0.003 mm measured from taper to D1
Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm
Thread G1
G1 = thread for clamping screw
Data carriers
Bore for data carrier as an option
Toolholder changes
For automatic toolholder changes
Coolant supply
Coolant supply according to ISO 7388 JD/JF
Bores for form JF are sealed for transport
Face contact
Similar to DIN ISO 7388-2 JD/JF however with face contact
Dual Contact version with simultaneous tapered and flat work surfaces
Scope of delivery
Including WELDON clamping screw
Individual
Additional sizes and customized designs are available upon request