MES HSK-A 50 Ø27x60
Face mill arbors
ID 23000672
MES HSK-A 50 Ø27x60, Toolholders
- Face mill arbors
- Series: Face mill arbors
- Toolholder interface: HSK-A 50
- Clamping diameter: 27 mm
- Thread in clamping diameter: M12
- Projecting length: 60 mm
- Run-out accuracy: ≤ 0.006 mm measured from taper to D1
- Balancing grade: G2.5 at 25,000 RPM or Umax < 1 gmm
Technical details
| Technology | Face mill arbors |
|---|---|
| Series | Face mill arbors |
| Toolholder interface | HSK-A 50 |
| Toolholder standard | DIN ISO 12164-1 |
| Clamping diameter D1 | 27 mm |
| Thread tightening bolt G | M12 |
| D2 [mm] | 60.0 |
| Projecting length L1 [mm]/[inch] | 60 mm / 2.4" |
| L4 [mm] | 34.0 |
| L11 [mm] | 21.0 |
| Weight [kg] | 1.09 |
| Coolant-proof | yes |
| Standard length | yes |
Variant
Voor het vasthouden van snijders met kruisgleuf
Uitloopnauwkeurigheid
≤ 0,006 mm gemeten van de kegel tot D1
Balanceergraad
G2.5 bij 25.000 tpm of Umax < 1 gmm
Gegevensdragers
Boorgaten voor gegevensdragers volgens DIN 69873
Wissel van gereedschapshouders
Voor automatische wissel van gereedschapshouders
Levering
Inclusief spanbout
Individueel
Andere afmetingen en uitvoeringen op maat zijn op verzoek verkrijgbaar