iTENDO² SCHUNK CAPTO C6 Ø32x110
Sensory toolholder, components and accessories
ID 1509962
iTENDO² SCHUNK CAPTO C6 Ø32x110
- Series: iTENDO²
- Toolholder interface: SCHUNK CAPTO C6
- Clamping diameter: 32 mm
- Projecting length: 110 mm
- Run-out accuracy: < 0.003 mm at 2.5 x D
- Balancing grade: G2.5 at 25,000 RPM or Umax < 1 gmm
- Min. torque: 650 Nm
- Not included in the scope of delivery: Does not include an actuation key
- Precondition: iTENDO² pad or iTENDO² easy connect is necessary for the use of the iTENDO² toolholder.
Technical details
| Técnica | Portaherramientas sensorial, componentes y accesorios |
|---|---|
| Serie | iTENDO² |
| Interfaz del portaherramientas | SCHUNK CAPTO C6 |
| Portaherramientas estándar | ISO 26623-1 |
| Diámetro de sujeción D1 | 32 mm |
| D2 [mm] | 62.5 |
| D3 [mm] | 63.0 |
| D6 [mm] | 59.0 |
| Longitud de proyección L1 [mm] | 110.0 |
| L4 [mm] | 61.5 |
| Par de apriete mín. [Nm] | 650.0 |
| Peso [kg] | 2.4 |
| Vida útil de la batería [h] | 10 |
| Sensor de aceleración* | 100.0 |
| Revoluciones máx. [1/min] | 25000.0 |
| Refrigeración externa/refrigeración interna [bar] | 80.0 |
Portaherramientas iTENDO² solo en combinación con un paquete iTENDO² (p. ej., iTENDO² pad)
* g=9,81m/s2
* g=9,81m/s2
Uitloopnauwkeurigheid
< 0,003 mm bij 2,5 x D
Balanceergraad
G2.5 bij 25.000 tpm of Umax < 1 gmm
Kwaliteit van de gereedschapsschacht
h6
Tussenliggende hulzen
Met behulp van de tussenhulzen kunnen bredere schachtdiameters worden geklemd
Gegevensdragers
Boorgat voor gegevensdrager optioneel
Wissel van gereedschapshouders
Voor automatische wissel van gereedschapshouders
Lengte-instelschroef
Zonder afstelschroef voor de afstelling van de axiale lengte
Individueel
Andere afmetingen en uitvoeringen op maat zijn op verzoek verkrijgbaar