KSC-F
Basic clamping vise
The SCHUNK KONTEC KSC-F single-acting vises are perfectly suitable for equipping palletizing systems. Due to the modular system, the VERO-S interface and the 160° quick clamping, they can be adapted to new clamping tasks in no time at all.
Description
Advantages – Your benefits
- Extremely flat design
For maximum utilization of the machine room - Quick clamping via torque wrench
Simple, fast, and reliable workpiece clamping - High clamping forces
Ensure process reliability during machining - Large clamping range
High level of flexibility - Lateral drainage slots
For drainage of coolant and chips - Wide range of applications
Suitable for rough and finished parts machining - Wide jaw program
Optimal adaptation to new clamping tasks - Optimum jaw support for O.D. and I.D. clamping due to a very long base jaw guidance
Allows high clamping forces at a long service life - Clamping by tension
No bending of base body - VERO-S interface
Versatile range of combinations thanks to the VERO-S modular system for even shorter set-up times.
Options and special information
- The highly efficient all-rounder for raw and finished part machining
SCHUNK KONTEC KSC-F single-acting vise with fixed jaw is especially suitable for use in automated machine loading. They score with a quick adjustment of the clamping range, flat design, and low weight. These are the perfect conditions for the use in pallet storage units. The sizes KSC-F 80, KSC-F 125, and KSC-F 160 are particularly designed for the common pallet sizes 320 x 320 mm, 400 x 400 mm and 500 x 500 mm. - It achieves high clamping forces even at a comparably low torque. As the clamping is provided by tension, the bending load on the base body is minimized. The vises are therefore perfectly suitable for the use on the quick-change pallet system from SCHUNK.