KSP3 100-Z-AS-IM
ID 1467557
Productkenmerken
- Klemkrachtblok met 2 klauwen
- Centrisch klemmen
- Standaard slag
- Coördinaatgeslepen positioneringsgaten
- Klemkrachtversterking/externe borging
- Inductieve klauwdetectie
- Basisklemmen: Fijne vertanding en messing en groef
- Afmetingen: 100 x 100 x 69,2 mm
- Klemkracht bij max. bedrijfsdruk: 18 kN
- Extra klemkracht dankzij de veermontage: 2.5 - 6.5 kN
- Slag per klem: 2 mm
- Max. klemhoogte: 60 mm
- Rondloopnauwkeurigheid: 0.01 mm
- Werkdruk: 3 - 9 bar
- Luchtverbruik per dubbele slag bij 6 bar: 1000 cm³
- Sluit-/openingstijd: 0.2 s
- Gewicht: 4 kg
Technical details
| Slag per klem [mm] | 2.0 |
|---|---|
| Klemkracht bij max. bedrijfsdruk [kN] | 18.0 |
| Minimale extra klemkracht dankzij de veermontage [kN] | 2.5 |
| Maximale extra klemkracht dankzij de veermontage [kN] | 6.5 |
| Min. werkdruk [bar] | 3.0 |
| Max. werkdruk [bar] | 9.0 |
| Rondloopnauwkeurigheid van spanner [mm] | 0.01 |
| Max. klemhoogte [mm] | 60.0 |
| Luchtverbruik per dubbele slag bij 6 bar [cm³] | 1000.0 |
| Sluit-/openingstijd [s] | 0.2 |
| Gewicht [kg] | 4.0 |
Scope of delivery
Clamping force block, fastening screws, cover plugs, clamping sleeves, fitting screws, inductive proximity switch, connection cable, cover, operating manual
Clamping force
The clamping force is the arithmetic sum of the individual forces occurring at the jaws at distance "H" at maximum pressure.
Inductive monitoring of clamping slide positions
Possibility to monitor two jaw positions between the end positions of the base jaws using proximity switches (e.g. "open" and "clamped").
Height tolerance of the vise
±0.04 mm.
Clamping force blocks with the same height are available on request.
Repeat accuracy
Results from the end position spread after 100 consecutive strokes
Maintenance and repair
For the maintenance of TANDEM vises, our special grease LP 410 should be used (ID 0184213)