KSX-E 125-430-CI IOL
ID 1601447
Caractéristiques des produits :
- Sans mors
- Contrôle par IO-Link
- Force de serrage programmable en permanence
- Force de serrage programmable en continu
- Pré-positionnement des mors
- Transfert pneumatique des fluides dans le système de mors
- Interface IO-Link: Connexion de câble fixe
- Dimensions: 125 x 520 x 150 mm
- Course de serrage de base: 120 mm
- Force de serrage: 6 - 40 kN
- Tension de fonctionnement de l'unité de commande: 24 V DC
- Tension de fonctionnement de l'unité de l'actionneur: 48 V DC
- Poids: 32 kg
Détails techniques
Min. clamping force [kN] | 6.0 |
---|---|
Width of the clamping vise [mm] | 125.0 |
Basic clamping stroke [mm] | 120.0 |
Max. clamping force [kN] | 40.0 |
Weight [kg] | 32.0 |
Operating voltage actuator [V DC] | 48.0 |
Operating voltage control unit [V DC] | 24.0 |
Scope of delivery
Vise, operating manual; without system jaws, without connection cable for integration into the machine control
Programmable clamping force
The clamping force can be continuously adjusted via the software in a range from 6 kN to 40 kN per chuck jaw.
Jaw pre-positioning and programmable clamping stroke
The jaws can be pre-positioned depending on the workpiece size so that the clamping stroke and clamping time can then be reduced to a minimum during automated loading processes.
Pneumatic media transfer into the system jaw
For workpiece contact control via dynamic pressure or cleaning of the clamping surfaces The system jaws must be prepared accordingly by the customer.
Clamping range
To cover the entire clamping range from 5 to 420 mm, the vise must be extended with the corresponding drawbar extension (see accessories).