ELG 30-XXX-2-SYN
- Min. stroke per jaw: 100 mm
- Max. stroke per jaw: 400 mm
- Gripping force: 3000 N
- Max. ambient temperature: 55 °C
- Creating a custom gripper in the ELG configurator and downloading CAD data
Technical details
| Finger version | long |
|---|---|
| Synchronization | Synchron |
| Min. stroke per jaw [mm] | 100.0 |
| Max. stroke per jaw [mm] | 400.0 |
| Gripping force [N] | 3000.0 |
| Min. gripping force maintenance*** [%] | 80 |
| Weight* [kg] | 20.0 |
| Additional mass per 1 mm stroke** [kg] | 0.04 |
| Closing time [s] | 0.79 |
| Opening time [s] | 0.79 |
| Max. permissible speed (positioning) [mm/s] | 200.0 |
| Max. permissible speed (gripping) [mm/s] | 10.0 |
| Recommended workpiece weight [kg] | 15.0 |
| Repeat accuracy (positioning, unidirectional) [mm] | 0.1 |
| Max. permissible finger length [mm] | 800.0 |
| Max. permissible weight per finger [kg] | 18.0 |
| Min. ambient temperature [°C] | 5.0 |
| Max. ambient temperature [°C] | 55.0 |
| IP protection class | 20 |
| Protection class IP with bellow | 44 |
| Standstill torque (shaft diameter 8/9 mm) [Nm] | 1.32 |
| Standstill torque (shaft diameter 11/14 mm) [Nm] | 1.6 |
| Standstill torque (shaft diameter 19 mm) [Nm] | 1.97 |
| Standstill torque (shaft diameter 24 mm) [Nm] | 2.63 |
| Max. drive speed (shaft diameter 8/9 mm) [1/min] | 4500.0 |
| Max. drive speed (shaft diameter 11/14 mm) [1/min] | 3800.0 |
| Max. drive speed (shaft diameter 19 mm) [1/min] | 3000.0 |
| Max. drive speed (shaft diameter 24 mm) [1/min] | 2300.0 |
| Moment Mx max. [Nm] | 210.0 |
| Moment My max. [Nm] | 850.0 |
| Moment Mz max. [Nm] | 210.0 |
| Max. axial force Fz max. [N] | 3500.0 |
* referring to the basic variant shown with 100 mm stroke per jaw without additional options
** referring to the basic variant without additional options
*** referring to the use of motors with motor brake and/or when using the option position clamping
最大荷重
最大許容フィンガー突起
Moment loading
Finger version: short finger length
フィンガーバージョン:長いフィンガー長
最大荷重
示されたモーメントと荷重は固定値であり、各ベースジョーに作用し、同時発生することがあります。把持力自身によって発生するモーメントに加えて荷重が発生する可能性があります。また、モーメント荷重については、図をご参照ください。
最大許容フィンガー突起
Moment loading
Finger version: short finger length
Lmax is equivalent to the maximum permitted finger length, see the technical data table.
- green
- Permitted range
- grey
- Inadmissible range
フィンガーバージョン:長いフィンガー長
Lmax は、最大許容フィンガー長に該当します。テクニカルデータ表をご参照ください。
- green
- 許容範囲
- grey
- 許容不可範囲
モデルシリーズに関する一般注意事項
把持力
モーターのトルク停止時に距離 P で各ジョーにかかったときの個別の力の算術合計です (図を参照)。
停止トルク
規定の把持力を得るために必要なモータの静止トルク(モータ軸径別)。このトルクを超えないようにしてください。非同期式の場合、必要な静止トルクは半分になります。
フィンガー長
距離 P の地点の基準面から主軸の方向に測定します。
把持力の維持
電気的保持ブレーキ(モーターブレーキ付きモーターの使用、および/またはポジションクランプオプションの利用)による緊急停止状況や電圧降下が発生した場合でも、当初加えられた把持力の少なくとも80%の把持力を安全に維持します。
繰り返し精度 (位置決め、一方向)
一定の条件下での、同じ方向のから目標位置への 100 回連続の動作を行った後のベースジョーの実際の位置のずれとして定義。
閉 / 開回数
グリッピング時に、取扱説明書に記載されているようにして速度を調節し、開閉所要時間を増やすことができるようにする必要があります。指定されている時間は、フィンガーあたりの最大許容重量を遵守して、電気的制限のない (最大電流の )状態で、最大加速度および最大速度で、ベースジョーの移動時間のみです。
オンラインコンフィギュレーターへのアクセス方法
コンフィギュレーターは、SCHUNK のウェブサイトまたは https://schunk.com/jp/ja/konfigurator-elg 直接アクセスすることができます。
作動方式
スピンドルドライブ
ハウジングの材質
アルミニウム
ベースジョーの材質
アルミニウム
作動
適合性のあるサーボドライブによる電動
保証
12 カ月
納品内容
注文仕様のグリッパー、アクセサリーキット(芯出しスリーブ/詳細内容は取扱説明書を参照)、安全に関する情報。製品固有の説明書は、schunk.com/downloads-manualsからダウンロードいただけます。