KSH3-F 160
Hydraulische klemkrachtblokken met 2 klauwen
ID 1463206
Hydraulische klemkrachtblokken, standaard
Productkenmerken
Productkenmerken
- Klemkrachtblok met 2 klauwen
- Met vaste klauw
- Standaard slag
- Basisklemmen: Fijne vertanding en messing en groef
- Afmetingen: 160 x 160 x 87,2 mm
- Klemkracht bij max. bedrijfsdruk: 45 kN
- Slag per klem: 6 mm
- Max. klemhoogte: 60 mm
- Rondloopnauwkeurigheid: 0.01 mm
- Werkdruk: 10 - 60 bar
- Olieverbruik per dubbele slag: 100 cm³
- Sluit-/openingstijd: 1.5 s
- Gewicht: 14 kg
Technické údaje
| Stroke per jaw [mm] | 6.0 |
|---|---|
| Clamping force at max. operating pressure [kN] | 45.0 |
| Min. operating pressure [bar] | 10.0 |
| Max. operating pressure [bar] | 60.0 |
| Repeat accuracy of vise [mm] | 0.01 |
| Max. jaw height [mm] | 60.0 |
| Distance H [mm] | 25.0 |
| Oil consumption per double stroke [cm³] | 100.0 |
| Closing/opening time [s] | 1.5 |
| Weight [kg] | 14.0 |
Scope of delivery
Clamping force block, fastening screws for system jaws and clamping force block, cover plugs, fitting screws, clamping sleeves, operating manual
Clamping force
The clamping force is the arithmetic sum of the individual forces occurring at the jaws at distance "H" at maximum pressure.
Height tolerance of the vise
±0.04 mm.
Clamping force blocks with the same height are available on request.
Repeat accuracy
Results from the end position spread after 100 consecutive strokes
Maintenance and repair
For the maintenance of TANDEM vises, our special grease LP 410 should be used (ID 0184213)