KSH3 160-Z-IM
ID 1467604
제품 특징:
- 2-죠 조임력 블록
- 중앙 클램핑
- 표준 스트로크
- 지그 생성 포지셔닝 보어
- 유도성 죠 모니터링
- 베이스 죠: 미세 톱니바퀴 및 텅앤그루브
- 치수: 160 x 160 x 87,2 mm
- 최대 작동 압력에서의 클램핑 포스: 45 kN
- 죠당 스트로크: 3 mm
- 최대 죠 높이: 60 mm
- 반복 정밀도: 0.01 mm
- 작동 압력: 10 - 60 bar
- 오일 소모/이중 스트로크: 100 cm³
- 닫힘시/열림시 시간: 1.5 s
- 중량: 14 kg
Technical details
| Stroke per jaw [mm] | 3.0 |
|---|---|
| Clamping force at max. operating pressure [kN] | 45.0 |
| Min. operating pressure [bar] | 10.0 |
| Max. operating pressure [bar] | 60.0 |
| Repeat accuracy of vise [mm] | 0.01 |
| Max. jaw height [mm] | 60.0 |
| Distance H [mm] | 25.0 |
| Oil consumption per double stroke [cm³] | 100.0 |
| Closing/opening time [s] | 1.5 |
| Weight [kg] | 14.0 |
Scope of delivery
Clamping force block, mounting screws, cover plugs, clamping sleeves, fitting screws, inductive proximity switch, connection cable, cover, operating manual
Clamping force
The clamping force is the arithmetic sum of the individual forces occurring at the jaws at distance "H" at maximum pressure.
Inductive monitoring of clamping slide positions
Possibility to monitor two jaw positions between the end positions of the base jaws using proximity switches (e.g. "open" and "clamped").
Height tolerance of the vise
±0.04 mm.
Clamping force blocks with the same height are available on request.
Repeat accuracy
Results from the end position spread after 100 consecutive strokes
Maintenance and repair
For the maintenance of TANDEM vises, our special grease LP 410 should be used (ID 0184213)